7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
7.1.8
This sets the actual OD data after InitiatePutOD is successful.
[Parameters required by the client]
• List of Object Description
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None
7.1.9
This is used to announce that OD setting is being terminated.
[Parameters required by the client]
None
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None
Object attribute setting (PutOD: Server)
Set the data to be written in the OD.
Object attribute setting termination (TerminatePutOD: Server)
7-13
MELSEC-A