7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
7.1.21
Use "Start" service to Run the sequence program from the client.
This can only be executed when the PC CPU status is Operational or Partially Operational. (Use
Status service to check the status.)
This can only be executed when the sequence program domain allocated by the CreateProgram
Invocation is in the READY or IN-USE status. (Use GetOD to check the status.)
PI status change
Status after execution
Use the GetOD service to check the PI status.
[Parameters required by the client]
• Access Specification
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None
Program RUN (Start: Server)
NON-EXISTENT
×
Specify the Index or Name of the Program Invocation to be started up.
Access Specification
Index
PI Name
PI status before execution
IDLE
RUNNING
Setting value
PI Index
PI Name
7-26
MELSEC-A
RUNNING
STOPPED
×
×