Qseven Connector (J1); Table 13: Qseven Connector Pin Assignment - Kontron Qseven-Eval Carrier User Manual

7.1. QSEVEN Connector (J1)

The QSEVEN connector is MXM 230-pin connector, with the same pins on both sides:
 Top side: 103 pins are on the left side, 12 pins on the right side
 Bottom side(mirrored): 12 pins are on the left side, 103 pins on the right side

Table 13: QSEVEN Connector Pin Assignment

Pin.No Pin Name (Bottom side row)
1 GND
3 GBE_MDI3-
5 GBE_MDI3+
7 GBE_LINK100#
9 GBE_MDI1-
11 GBE_MDI1+
13 GBE_LINK#
15 GBE_CTREF
17 WAKE#
19 GPO0
21 SLP_BTN# / GPII1
23 GND
KEY
25 GND
27 BATLOW# / GPII2
29 SATA0_TX+
31 SATA0_TX-
33 SATA_ACT#
35 SATA0_RX+
37 SATA0_RX-
39 GND
41 BIOS_DISABLE# / BOOT_ALT#
43 SDIO_CD#
45 SDIO_CMD
47 SDIO_PWR#
49 SDIO_DAT0
51 SDIO_DAT2
53 reserved
55 reserved
57 GND
59 HDA_SYNC / I2S_WS
61 HDA_RST# / I2S_RST#
63 HDA_BITCLK / I2S_CLK
65 HDA_SDI / I2S_SDI
67 HDA_SDO / I2S_SDO
69 THRM#
www.kontron.com
Pin.No Pin Name (Top side row)
2 GND
4 GBE_MDI2-
6 GBE_MDI2+
8 GBE_LINK1000#
10 GBE_MDI0-
12 GBE_MDI0+
14 GBE_ACT#
16 SUS_S5#
18 SUS_S3#
20 PWRBTN#
22 LID_BTN# / GPII0
24 GND
KEY
26 PWGIN
28 RSTBTN#
30 SATA1_TX+
32 SATA1_TX-
34 GND
36 SATA1_RX+
38 SATA1_RX-
40 GND
42 SDIO_CLK#
44 reserved
46 SDIO_WP
48 SDIO_DAT1
50 SDIO_DAT3
52 reserved
54 reserved
56 USB_OTG_PEN
58 GND
60 SMB_CLK / GP1_I2C_CLK
62 SMB_DAT / GP1_I2C_DAT
64 SMB_ALERT#
66 GP0_I2C_CLK
68 GP0_I2C_DAT
70 WDTRIG#
QSEVEN-Eval Carrier - Rev. 1.1
// 28