Lan Connector (J33); Table 32: Lan Connector; Table 33: Lan Left Leds State; Table 34: Lan Right Leds State - Kontron Qseven-Eval Carrier User Manual

7.18. LAN Connector (J33)

This connector provides an isolated Ethernet 1000Base-T port, which is connected to an on-board LAN Controller. The
galvanic isolated transformers (1500 Vrms, Voltage Regulator Module (VRM)) are integrated in the LAN connectors.

Figure 26: LAN Connector

Table 32: LAN Connector

Pin Signal
1 MDI0+
3 MDI1+
5 CTREF
7 MDI2+
9 MDI3+
11 Green (A) / Yellow (C)
13 Green (A) / Yellow (C)

Table 33: LAN Left LEDs State

Left LED State
Off
Green (constant on)
Green (flashing)

Table 34: LAN Right LEDs State

Right LED State
Off
Green (constant on)
Green (flashing)
www.kontron.com
Pin Signal
2 MDI0-
4 MDI1-
6 CTREF
8 MDI2-
10 MDI3-
12 Green (C) / Yellow (A)
14 Green (C) / Yellow (A)
Link Activity State
Link not active
Link active
Link active plus activity
Link Speed
10 Base-T
100 Base-T
1000 Base-T
QSEVEN-Eval Carrier - Rev. 1.1
// 44