The following table provides pinout information for the wired power connector, J1.
Table 17: Power Connector J1 Pinout
Power Connector (J1)
The following mating power connectors are recommended for use with the COMe Ref. Carrier-i T6 TMIP:
Wurth Electronics, Part Numbers: 691361100004 / 691363110004
TE Connectivity AMP Connectors, Part Numbers: 284506-4 / 1986692-4 / 1986693-4
2.3.16. RTC
The COMe Ref. Carrier-i T6 TMIP provides a 2-pin connector, J36, for an external CMOS battery and provides a
2.5F goldcap, (C35), for RTC backup.
www.kontron.com
Pin
Signal
1
V_IN
2
V_IN
3
GND
4
GND
COMe Ref. Carrier-i T6 TMI - User Guide Rev. 1.4
// 31