Kontron FlexATX-KBL-S-C236 User Manual
  1. Manuals
  2. Brands
  3. Kontron Manuals
  4. Motherboard
  5. FlexATX-KBL-S-C236
  6. User manual
Kontron FlexATX-KBL-S-C236 User Manual

Kontron FlexATX-KBL-S-C236 User Manual

Hide thumbs Also See for FlexATX-KBL-S-C236:
Table of Contents

Advertisement

Quick Links

Download this manual
USER GUIDE
FlexATX-KBL-S-C236
Doc. Rev. 1.1
Doc.-ID: 1061-6791

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FlexATX-KBL-S-C236 and is the answer not in the manual?

Questions and answers

Related Manuals for Kontron FlexATX-KBL-S-C236

Summary of Contents for Kontron FlexATX-KBL-S-C236

  • Page 1  USER GUIDE FlexATX-KBL-S-C236 Doc. Rev. 1.1 Doc.-ID: 1061-6791...
  • Page 2 FlexATX-KBL-S-C236 – Rev. 1.1 This page has been intentionally left blank www.kontron.com // 2...
  • Page 3 Kontron with respect to technical processes described in the manual or any product characteristics set out in the manual. Kontron assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright or mask work rights to these products and makes no representations or warranties that these products are free from patent, copyright or mask work right infringement unless otherwise specified.

  • Page 4: Revision History

    If you have any difficulties using this user guide, discover an error, or just want to provide some feedback, contact Kontron support. Detail any errors you find. We will correct the errors or problems as soon as possible and post the...
  • Page 5 Kontron sells products worldwide and declares regional General Terms & Conditions of Sale, and Purchase Order Terms & Conditions. Visit http://www.kontron.com/terms-and-conditions. For contact information, refer to the corporate offices contact information on the last page of this user guide or visit our website CONTACT US.

  • Page 6: Symbols

    FlexATX-KBL-S-C236 – Rev. 1.1 Symbols The following symbols may be used in this manual DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 7: Table Of Contents

    FlexATX-KBL-S-C236 – Rev. 1.1 Table of Contents Symbols ..........................................6 Table of Contents ....................................... 7 List of Tables ........................................9 List of Figures ........................................10 Introduction ......................................11 Description ......................................12 Installation procedure ..................................13 3.1. Packing Check List ..................................... 13 3.2.
  • Page 8 FlexATX-KBL-S-C236 – Rev. 1.1 Indicators ......................................43 7.1. Attached Indicators List ..................................43 7.2. External indicators list ................................... 43 7.3. System Status LED ....................................43 BIOS Setup structure ..................................44 8.1. Main Setup Menu ..................................... 44 8.2. Advanced Setup Menu ................................... 44 8.3.

  • Page 9: List Of Tables

    FlexATX-KBL-S-C236 – Rev. 1.1 List of Tables Table 1: Component Main Data ..................................17 Table 2: Environmental Conditions ................................19 Table 3: Certification and Compliance Information ..........................19 Table 4: Connectors ......................................20 Table 5: Connector Definitions ..................................23 Table 6: Processor Support ..................................24 Table 7: Memory Support .....................................

  • Page 10: List Of Figures

    FlexATX-KBL-S-C236 – Rev. 1.1 List of Figures Figure 1: Block Diagram of FlexATX-KBL..............................16 Figure 2: Front Side ......................................21 Figure 3: Rear Side ......................................22 Figure 4: Ethernet Connector ..................................25 Figure 5: USB 2.0 / 3.0 socket ..................................26 Figure 6: USB 2.0 High Speed Cable ................................

  • Page 11: 1/ Introduction

    FlexATX-KBL-S-C236 – Rev. 1.1 1/ Introduction This manual describes the FlexATX Kabylake S board. This board will also be denoted FlexATX-KBL-S within this Users Guide. The use of this Users Guide implies a basic knowledge of PC hard- and software. This manual is focussed on describing the FlexATX-KBL-S board’s special features and is not intended to be a standard PC textbook.

  • Page 12: 2/ Description

    FlexATX-KBL-S-C236 – Rev. 1.1 2/ Description The mainboard FlexATX-KBL-S is based on the Kabylake processor family. It uses the Chipset C236 PCH from Intel. This powerful hardware with efficient graphic and network capabilities offers a broad range of application areas.

  • Page 13: 3/ Installation Procedure

    • Handle the board only by the edges To get the board running follow these steps. If the board shipped from Kontron has already components like RAM and CPU cooler mounted, then the next steps below can be skipped. Turn off the PSU (Power Supply Unit) Turn off PSU completely (no mains power connected to the PSU) or leave the Power Connectors unconnected while configuring the board.

  • Page 14: Requirements Iec60950-1

    FlexATX-KBL-S-C236 – Rev. 1.1 BIOS Setup Enter the BIOS setup by pressing the <F2> key during boot up. Enter “Exit Menu” and Load Setup Defaults. To clear all BIOS settings, including Password protection, activate “Load Default BIOS Settings” Jumper for > 10 sec (without power connected).

  • Page 15: Lithium Battery Precautions

    FlexATX-KBL-S-C236 – Rev. 1.1 3.4. Lithium battery precautions Danger of explosion if the lithium battery is incorrectly replaced. • Replace only with the same or equivalent type recommended by the manufacturer • Dispose of used batteries according to the manufacturer’s instructions VORSICHT! Explosionsgefahr bei unsachgemäßem Austausch der Batterie.

  • Page 16: 4/ System Specifications

    FlexATX-KBL-S-C236 – Rev. 1.1 4/ System specifications 4.1. Block Diagram Figure 1: Block Diagram of FlexATX-KBL www.kontron.com // 16...

  • Page 17: Component Main Data

    FlexATX-KBL-S-C236 – Rev. 1.1 4.2. Component Main Data The table below summarizes the features of the FlexATX-KBL-S embedded motherboard. Table 1: Component Main Data Motherboard FlexATX-KBL-S Form factor FlexATX with 229 mm x 191 mm (9 inch x 7.5 inch)
  • Page 18 FlexATX-KBL-S-C236 – Rev. 1.1 Internal I/O SATA 6 x SATA 3.0 (6 Gb/s) PC Buzzer Standard PC buzzer on board LVDS (40-pin) 1 x ( 2 x 20 ) 1.25 mm pin-header for 24-bit dual channel with brightness control 1x16 PEG Gen3, 1x PCI x4, 1x PCI x1 M.2 (M-Key, 2280)

  • Page 19: Table 2: Environmental Conditions

    FlexATX-KBL-S-C236 – Rev. 1.1 Table 2: Environmental Conditions Operating 0°C to +60°C (32°F~140°F) operating temperature (forced cooling). It is the customer’s responsibility to provide sufficient airflow around each of the components to keep them within allowed temperature range. 50 % to 90 % relative...

  • Page 20: 5/ Jumpers And Connectors

    FlexATX-KBL-S-C236 – Rev. 1.1 5/ Jumpers and Connectors 5.1. Hardware Configuration Setting This chapter gives the definitions and shows the positions of jumpers, headers and connectors. All of the configuration jumpers on the board are in the proper position. The default settings shipped from factory are marked with an asterisk (*).

  • Page 21: Mainboard Placement And Rear I/O Locations

    FlexATX-KBL-S-C236 – Rev. 1.1 5.2. Mainboard Placement and Rear I/O locations Figure 2: Front Side Battery holder 13 PCIeX1 ATX 12 V power interface 14 Feature Connector Memory connector 15 Buzzer SATA connector 16 LVDS Connector PCIe connector 17 ATX-4-pin Power connector...

  • Page 22: Rear Side

    FlexATX-KBL-S-C236 – Rev. 1.1 5.3. Rear Side Figure 3: Rear Side www.kontron.com // 22...

  • Page 23: 6/ Pin Definitions

    FlexATX-KBL-S-C236 – Rev. 1.1 6/ Pin Definitions The following sections provide pin definitions and detailed description of all on-board connectors. The connector definitions follow the following notation: Table 5: Connector Definitions Column Name Description Shows the pin-numbers in the connector. The graphical layout of the connector definition tables is made similar to the physical connectors.

  • Page 24: Processor Support

     7th generation Intel® Core i7, -i5, -i3 Quad Core processor  Intel® Xeon processor Kontron has defined the board versions as listed in the following table, so far all based on Embedded CPUs. Table 6: Processor Support Name Speed Turbo Embed.

  • Page 25: Ethernet Connectors (I/O Area)

    FlexATX-KBL-S-C236 – Rev. 1.1 6.3. Ethernet Connectors (I/O area) The FlexATX-KBL-S supports four channels of 10/100/1000 Mbit Ethernet. In order to achieve the specified performance of the Ethernet port, Category 5 twisted pair cables must be used with 10/100 MByte/s and Category 5E, 6 or 6E with 1 Gbit/s LAN networks.

  • Page 26: Usb Connectors (I/O Area)

    FlexATX-KBL-S-C236 – Rev. 1.1 6.4. USB Connectors (I/O area) Figure 5: USB 2.0 / 3.0 socket USB 2.0 USB 3.0 Type Signal Note 5 V / SB 5 V USB2.0 / 3.0 USB 3- USB2.0 / 3.0 USB 3+ USB2.0 / 3.0 USB2.0 / 3.0...

  • Page 27: Figure 7: Usb 3.0 High Speed Cable

    FlexATX-KBL-S-C236 – Rev. 1.1 For SuperSpeed rates it is required to use a USB cable, which is specified in USB3.0 standard: Figure 7: USB 3.0 High Speed Cable UTP Signal Pair Filler, optional SDP Signal Pair Braid Jacket Power SDP Signal Pair Ground www.kontron.com...

  • Page 28: Fan Connector (Internal, J34, J35)

    FlexATX-KBL-S-C236 – Rev. 1.1 6.5. Fan Connector (internal, J34, J35) The FANSYS (SYS_FAN) can be used to power, control and monitor a fan for chassis ventilation etc. The 4-pin header is recommended to be used for driving 4-wire type fan in order to implement FAN speed control.

  • Page 29: Front Panel (Internal)

    FlexATX-KBL-S-C236 – Rev. 1.1 6.6. Front Panel (internal) Figure 9: FP1 Connector Description Description USB Port 1 VBUS USB Port 2 VBUS USB Port 1 Data- USB Port 2 Data- USB Port 1 Data+ USB Port 2 Data+ Ground Ground...

  • Page 30: Internal Feature Connector

    FlexATX-KBL-S-C236 – Rev. 1.1 Description Description Power 6.8. Internal Feature Connector Figure 11: GPIO Internal Connector Description Description INTRUDER# SMBus Clock SLP_S4# SMBus Data SYS_PWROK External Battery Power 3.3V S5 Power 5.0V S5 GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6...

  • Page 31: Audio Jack Connectors (I/O Area)

    FlexATX-KBL-S-C236 – Rev. 1.1 6.9. Audio Jack Connectors (I/O area) Figure 12: Audio Jack Ring Sleeve Mating Audio Jack (example) Pin Designation Signal Type Note Front_L For headphone, max 1.6 V Ring Front R For headphone, max 1.6 V Sleeve...

  • Page 32: S/Pdif And Lineout Header (Internal, J31)

    FlexATX-KBL-S-C236 – Rev. 1.1 6.10. S/PDIF and Lineout header (internal, J31) Figure 13: S/PDIF and Lineout Header Table 8: S/PDIF Description SPDIF_Out SPDIF_In 6.11. LVDS (internal) Figure 14: LVDS Connector Description Description Power 12.0V S0 Power 12.0V S0 Power 12.0V S0 Power 12.0V S0...

  • Page 33: Sata (Serial Ata) Disk Interfaces (Internal)

    FlexATX-KBL-S-C236 – Rev. 1.1 Description Description Ground Ground LVDS Channel B Data0- LVDS Channel B Data0+ LVDS Channel B Data1- LVDS Channel B Data1+ LVDS Channel B Data2- LVDS Channel B Data2+ LVDS Channel B Clock- LVDS Channel B Clock+...

  • Page 34: Sata Internal Power(Sata_Pwr1)

    FlexATX-KBL-S-C236 – Rev. 1.1 6.13. SATA Internal Power(SATA_PWR1) The SATA power connector (SATA_PWR1) supplies the SATA hard disk with either 12 V or 5 V. Figure 17: SATA Power Internal Connector Pin Assignment SATA Power (SATA_PWR) Signal +12V VCC5 6.14. PCIe x1 connector 1 (J2)

  • Page 35: Mini Pcie Card Socket

    FlexATX-KBL-S-C236 – Rev. 1.1 Signal Signal REFCLK- PET0+ PET0- PER0+ PER0- PRSNT2# 6.15. Mini PCIe Card socket Figure 19: 52-pin Mini PCIe Card Signal Signal WAKE# +3.3V_S5 N.C. N.C. +1.5V_S0 CLKREQ# UIM-PWR UIM-DATA PCIe_REFCLK- UIM-CLK PCIe_REFCLK+ UIM-RST UIM-VPP UIM-C8 UIM-C4...

  • Page 36: Double Usb 3.0 Connector (J21)

    FlexATX-KBL-S-C236 – Rev. 1.1 Signal Signal +3.3V_S5 PU 3.3V(S0) PU 3.3V(S0) N.C. PU 3.3V(S0) N.C. +1.5V_S0 N.C. N.C. +3.3V_S5 6.16. Double USB 3.0 Connector (J21) This connector provides two USB 3.0 connections (downstream). The 5 V output is electronically fused to 900 mA each port.

  • Page 37: Dp Connector (J12)

    FlexATX-KBL-S-C236 – Rev. 1.1 Signal Remark USB SSTX+ Shield Shield 6.17. DP connector (J12) Figure 21: 20-pin DP connector Signal Signal ML LANE 0+ GND (ML LANE 0) ML LANE 0- ML LANE 1+ GND (ML LANE 1) ML LANE 1-...

  • Page 38: Module Power-In Connector

    FlexATX-KBL-S-C236 – Rev. 1.1 Signal Positive (+) V_BAT_INT Negative (-) 6.19. Module Power-In Connector Figure 23: Module Power-In Connector Signal Description V_MODULE Module Power 3.0 V to 5.25 V may be independent of Carrier power. N.C. Not connected 6.20. Internal Power Connector...

  • Page 39: Ps/2 Header (J30)

    FlexATX-KBL-S-C236 – Rev. 1.1 Signal Signal Power Input 12.0V S0 Power Input 5.0V S0 Power Input 12.0V S0 Power Input 5.0V S0 Power Input 3.3V S0 Ground Recommended Power Supply for KabyLake motherboard should be above or equal to 473 W.

  • Page 40: Spi External Flash Header (J36)

    FlexATX-KBL-S-C236 – Rev. 1.1 Signal Signal Power 3.3V S0 LPC LAD1 LPC LAD0 Ground SMBus Clock SMBus Data Power 3.3V S0 SERIRQ Ground 6.23. SPI External Flash header (J36) Figure 27: 12-pin SPI Header Signal Signal SPI Clock Power 3.3V S5...

  • Page 41: Rs-485/Rs-422 Header (J28)

    FlexATX-KBL-S-C236 – Rev. 1.1 Signal Signal SPI MOSI SPI ISOLATE SPI MISO Ground SPI IO2 SPI IO3 6.25. RS-485/RS-422 Header (J28) Figure 29: 5-pin RS-485/RS-422 Header Signal TX1- RX1+ TX1+ RX1- Ground 6.26. RS-232 Header (J27) Figure 30: 10-pin RS-232 Header...

  • Page 42: Rtc/Srtc Reset Jumper (J45, J46)

    FlexATX-KBL-S-C236 – Rev. 1.1 6.27. RTC/SRTC Reset Jumper (J45, J46) Figure 31: 2-pin RTC Reset Jumper RTC Reset Jumper (J45) Signal RTCRST# Ground SRTC Reset Jumper (J46) Signal SRTCRST# Ground www.kontron.com // 42...

  • Page 43: Flexatx-Kbl-S-C236 - Rev

    FlexATX-KBL-S-C236 – Rev. 1.1 7/ Indicators 7.1. Attached Indicators List Table 9: LEDs internal Part Indicator Function Upper Port Left LED GbE Link / Activity Upper Port Right LED GbE Speed 100/1000 Lower Port Left LED GbE Link / Activity...

  • Page 44: 8/ Bios Setup Structure

    FlexATX-KBL-S-C236 – Rev. 1.1 8/ BIOS Setup structure The Setup utility features for menus listed in the selection bar at the top of the screen:  Main  Advanced  Chipset  Security  Boot  Save & Exit The Setup menus are selected via the left and right arrow keys. The currently active menu and the currently active uEFI BIOS Setup item are highlighted in white.
  • Page 45 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description ACPI Debug Enable/Disable ACPI Debug Low Power SO Idle Enable/Disable Low Power SO Idle Lpit Recidency Counter Select Recidency Counter PCI Delay Optimization Enable/Disable PCI Delay Optimization ZpODD Enable/Disable ZpODD C6DRAM Enable/Disable C6DRAM...
  • Page 46 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description functional after AUX content gets reset Flash Wear Out Protection Enable/Disable Flash Wear Out Protection Current Debug Interface Status Display Current Debug Interface Status Debug Interface Enable/Disable Debug Interface Support Debug Interface Lock...
  • Page 47 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Configurations Boot Mode Nominal/Up/Down/Deactivate TDP selection Configurable TDP Enable/Disable Configurable TDP Lock Lock CTDP BIOS Control Enable/Disable CTDP Control via runtime ACPI BIOS methods ConfigTDP Levels ConfigTDP Turbo Activation Ratio, Power Limit 1, Power Limit 2...
  • Page 48 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Current Threshol Display PS Current Threshold3 Current Threshol Enable/Disable PS3 Enable Enable/Disable PS4 Enable IMON Display IMON Slope Slope IMON Display IMON Offset Offset IMON Set the Offset value as positive or Prefix...
  • Page 49 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Display PS Current Threshold3 Current Threshol Enable/Disable PS3 Enable Enable/Disable PS4 Enable IMON Display IMON Slope Slope IMON Display IMON Offset Offset IMON Set the Offset value as positive or Prefix negative Display VR Current Limit...
  • Page 50 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Display PS Current Threshold3 Current Threshol Enable/Disable PS3 Enable Enable/Disable PS4 Enable IMON Display IMON Slope Slope IMON Display IMON Offset Offset IMON Set the Offset value as positive or Prefix negative Display VR Current Limit...
  • Page 51 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Package C-State Un-demotion Enable/Disable Package C-State Un- demotion Cstate Pre-Wake Enable/Disable Cstate Pre-Wake IO MWAIT Redirection When set, will map IO_read instructions sent to IO registers PMG_IO_BASE_ADDRBASE+off set to MWAIT(offset) Package C State Limit...
  • Page 52 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description ME State Display ME State Manageability Display Manageability Features State Display Features State AMT BIOS Features Display AMT BIOS Features AMT Configuration ASF support Enable/Disable Alert Standard Format Support USB Provisioning of AMT...
  • Page 53 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Graphic Resolution for graphics mode Mode Resolution ME Unconfig on RTC Clear Display ME Unconfig on RTC Clear Comms Hub Support Enable/Disable support for Comms Hub JHI Support Enable/Disable Intel® DAL Host Interface Service (JHI)
  • Page 54 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Audio Delay Delay after applying power to HD Audio(Realtex) codec device I2C0 Controller Delay in _PSO I2C0 Controller SensorHub Delay after applying power to SensorHub device I2C1 Controller Delay in _PSO I2C1 Controller...
  • Page 55 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description ACPI Settings Enable ACPI Auto Configuration Enable/Disable BIOS ACPI Auto Configuration Enable Hibernation Enable/Disable System ability to Hibernate ACPI Sleep State Select the highest ACPI sleep state the system will enter when the SUSPEND...
  • Page 56 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Resolution 100x31 Enables/Disables extended terminal resolution Legacy OS Redirection On Legacy OS, the number of rows and Resolution columns supported redirection Putty KeyPad Select function key and keypad on Putty Redirection After BIOS...
  • Page 57 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description command time-out Device power-up delay Maximum time for the device will take before it properly report itself to the Host Controller LVDS LVDS Flat Panel Display Support Enable/Disable LVDS Flat Panel Display Configuration...

  • Page 58: Chipset Setup Menu

    FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description CPU Fan Speed Display CPU Fan Speed CPU Fan Cruise Control Disable = Full speed Thermal = does regulate fan speed according to specified temperature Speed = does regulate according to specified speed Watchdog Function 0 = Disable.
  • Page 59 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Dram Use user Enabled: User provided Power provide power weights, scale factor, Meter and channel power floor weights, values are used. scale Disabled: BIOS set power factors, weights, scale factor, and channel power floor...
  • Page 60 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Dimm1 Warm Range [255;0]=[31.875;0] in Thresho W for OLTM, [127.5;0] in C ld Ch1 for CLTM Dimm0 Warm Range [255;0]=[31.875;0] in Thresho W for OLTM, [127.5;0] in C for CLTM ld Ch1 Dimm1 Range [255;0]=[31.875;0] in...
  • Page 61 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Dimm1 Memory RAPL PL Enable= lock Rapl Limit RAPL Lock register, Disable(Disable=Def) RAPL PL Enable= enable, 1 enable Disable(Disable= Def) RAPL PL Range[0;2^14- 1 Power 1]=[2047.875;0] in W, (0= Def) RAPL PL Power PL 1 time windowX...
  • Page 62 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Early Write Time Centering Enable/Disable Early Write Time Centering 2D Early Write Drive Strentgh/ Enable/Disable Early Write Equalization Drive Strentgh/ Equalization Early Read Time Centering Enable/Disable Early Read Time Centering 2D Write Timing Centering 1D...
  • Page 63 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Turn Around Timing Training Enable/Disable Turn Around Timing Training Rank Margin Tool Enable/Disable Rank Margin Tool Training Memory Test Enable/Disable Memory Test Training DIMM SPD Alias Test Test to determine if the SPD...
  • Page 64 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description RH Activation Probability Used to adjust MC for Hardware RHP Exit on Failure (MRC) Exit on Failure for MRC training steps MC Lock Enable/Disable capacity to lock or not MC registers Probeless Trace...
  • Page 65 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description DLL Weak Lock Support Enable/Disable DLL Weak Lock Support Pwr Down Idle Timer The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means AUTO: 64 for ULX/ULT, 128...
  • Page 66 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description VDD Enable Enable/Disable forcing of VDD in the BIOS HDPC Support HDCP provisioning BIOS support Algorithm HDCP Re-encryption flow PM Support Enable/Disable PM Support PAVP Enable Enable/Disable PAVP Cdynmax Clamping Enable Enable/Disable Cdynmax...
  • Page 67 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description DMI Link ASPM Control Enable/Disable the control of Active State Power Management on SA side of the DMI Link DMI Extended Sync Control Enable DMI Extended Synchronization DMI De-emphasis Control Configure the De-emphasis...
  • Page 68 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description PEG Port Feature Detect Non-Compliance Detect Non-Compliance PCI Configuration Device Express Device in PEG Program PCIe ASPM after OpROM Enable/Disable Program PCIe ASPM after OpROM Program Static Phase1 Eq Program phase Presets/CTLEp Gen3 Root Port Preset...
  • Page 69 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Lane 15 Value for Lane 15 Gen3 Endpoint Hint Lane 0 Value for Lane 0 value for each Lane Lane 1 Value for Lane 1 Lane 2 Value for Lane 2 Lane 3...
  • Page 70 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description default (7, 3, 5, 8 for SKL.) Do not change from default unless debugging Allow PERST# GPIO Usage Enable/Disable GPIO-based reset to PEG endpoint(s) during margin search, if needed SW EQ Enable VOC Select Jitter &...
  • Page 71 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description PCI Express PCI Express Clock Gating PCI Express Clock Gating PCH-IO Configuration Configuration Enable/Disable for each root port DMI Link ASPM Control The control of active state power management of the DMI link...
  • Page 72 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description PCIE11 Cp Display PCIE11 Cp PCIE12 Cm Display PCIE12 Cm PCIE12 Cp Display PCIE12 Cp PCIE13 Cm Display PCIE13 Cm PCIE13 Cp Display PCIE13 Cp PCIE14 Cm Display PCIE14 Cm PCIE14 Cp Display PCIE14 Cp...
  • Page 73 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Enable/Disable PCI Express Device Fatal Error Reporting Enable/Disable NFER PCI Express Device Non- Fatal Error Reporting Enable/Disable PCI Express Device Non- Correctable Error Reporting Enable/Disable PCI Express Completion Timer T0 Enable/Disable SEFE Root PCI Express System...
  • Page 74 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Enable/Disable Snoop Latency Override Snoop Latency Override for PCH PCIE Non Snoop Latency Non Snoop Latency Override Override for PCH PCIE Force LTR Override Force LTR Override for PCH PCIE PCIE1 LTR Lock...
  • Page 75 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Configured as eSATA Hot Plug Supported Spin Up Device Enable/Disable Spin Up Device SATA Device Type Identify the SATA port is connected to solid state drive or hard disk drive Topology Identify the SATA Topology...
  • Page 76 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Configured as eSATA Hot Plug Supported Spin Up Device Enable/Disable Spin Up Device SATA Device Type Identify the SATA port is connected to solid state drive or hard disk drive Topology Identify the SATA Topology...
  • Page 77 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Configured as eSATA Hot Plug Supported Spin Up Device Enable/Disable Spin Up Device SATA Device Type Identify the SATA port is connected to solid state drive or hard disk drive Topology Identify the SATA Topology...
  • Page 78 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Connection to the controller Security Configuration RTC Lock Enable will lock bytes 38h- 3Fh in the lower/upper 128- byte bank of RTC RAM BIOS Lock Enable/Disable the PCH BIOS Lock Enable feature HD Audio Configuration...
  • Page 79 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Feature Feature Support: WoV (Wake on Voice) Bluetooth Enables/Disables DSP Sideband Feature BT Intel HFP Enables/Disables DSP Feature BT Intel A2DP Enables/Disables DSP Feature Codec based Enables/Disables DSP Feature DSP based Enables/Disables DSP...
  • Page 80 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description Intel WoV Enables/Disables 3rd Party Processing Module Support (identified by GUID) Sound Research Enables/Disables 3rd Party Processing Module Support (identified by GUID) Conexant Pre- Enables/Disables 3rd Party Process Processing Module Support (identified by GUID)
  • Page 81 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description SPI1 Controller Enables/Disables Serial IO Controller UART0 Controller Enables/Disables Serial IO Controller UART1 Controller Enables/Disables Serial IO Controller UART2 Controller Enables/Disables Serial IO Controller GPIO Controller Enables/Disables the GPIO Controller Serial IO I2C IO Voltage Select 1.8v or 3.3v for the...
  • Page 82 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description UCSI/UCMC device When enabled, ACPI will report UCSI/UCMC device TraceHub Configuration Menu TraceHub Enable Mode Select Enable, Disable or Debugger MemRegion 0 Buffer Size Select size of mem region 0 buffer MemRegion 1 Buffer Size...
  • Page 83 FlexATX-KBL-S-C236 – Rev. 1.1 Sub-Screen Function Description ACPRESENT PullDown when DeepSx or G3 exit CLKRUN# logic Enable the CLKRUN# logic to stop the PCI clocks Serial IRQ Mode Configure Serial IRQ Mode Port 61h Bit-4 Emulation Emulation of Port 61h bit-4...

  • Page 84: Security Setup Menu

    FlexATX-KBL-S-C236 – Rev. 1.1 8.4. Security Setup Menu The Security Setup menu provides information about the passwords and functions for specifying the security settings. The passwords are case-sensitive. Table 14: Security Setup Menu Functions Function Description Administrator Password Set Administrator Password...

  • Page 85: Boot Setup Menu

    FlexATX-KBL-S-C236 – Rev. 1.1 Function Description factory default keys Enroll Efi Image Allow the image to run in Secure Boot mode Save all secure boot variables Secure boot variables Platform Key(PK) Enroll Factory Defaults or load certificates from a file:...
  • Page 86 FlexATX-KBL-S-C236 – Rev. 1.1 Function Description Save Changes and Reset Reset the system after saving the changes Discard Changes and Reset Reset system setup without saving any changes Save Changes Save changes done so far to any of the setup option...

  • Page 87: List Of Acronyms

    FlexATX-KBL-S-C236 – Rev. 1.1 List of Acronyms Error Checking and Correction GPIO General Purpose Input Output Hard Disk PCIe PCI-Express PECI Platform Environment Control Interface Real Time Clock SATA Serial ATA SELV Safety Extra Low Voltage Serial Peripheral Interface Trusted Platform Module...

  • Page 88: About Kontron

    About Kontron Kontron, a global leader in embedded computing technology and trusted advisor in Internet of Things (IoT), works closely with its customers, allowing them to focus on their core competencies by offering a complete and integrated portfolio of hardware, software and services designed to help them make the most of their applications.

Table of Contents