Interfaces And Connectors; Table 6: Pinout Front Panel Connector Intel; Table 7: Pinout Configuration Jumper - Kontron K393 Series Technical Manual

Interfaces and Connectors

2 Interfaces and Connectors
2.1 Board
2.1.1 Front Panel Connector 10 pin Intel
Signal
HD-LED +
HD-LED -
GND
Reset_Button
reserved
T 5: P F P
ABLE INOUT RONT ANEL
Connector Details:
Mating Connector:
Power-LED:
NOTICE
HDD-LED:
Front panel is compatible with Intel "9 pin Front Panel" specification.
2.1.2 Configuration Jumper
Pin Signal
1 GND
2 Reserved
3 BIOS Reserved Mode A
4 BIOS Reserved Mode B
5 BIOS Recovery -
6 BIOS Recovery +
T 6: P C
ABLE INOUT ONFIGURATION
Configuration options:
BIOS Recovery mode: Connect Pin 5 + 6
BIOS Reserved Mode: Connect Pin 3 + 4
Jumper default position: Pin 4 + 5
20
Technical Manual - Alderlake-N Mini-ITX Industrial series
Pin Pin
1 2
3 4
5 6
7 8
9 -
C I
ONNECTOR NTEL
Anode (Pin2) – Static current source 13mA up to 4V, suitable for various LED colors.
Cathode (Pin 4) – Switched GND to switch LED on/off
Anode (Pin1) – Static current source 13mA up to 4V, suitable for various LED colors.
Cathode (Pin 3) – Switched GND to switch LED on/off
J
UMPER
Signal
Power-LED +
Power-LED -
Power_Button
GND
Key
Default
Jumper
Pin 6 is oriented to PCB edge
www.kontron.com