Table of Contents
Advertisement
3/ Installation Procedure
3.1. Packing Check List
The package includes the following basic items accompany with this user guide.
One Board
If this item is either damaged or missing, please contact your vendor and save all packing materials for future
replacement and maintenance.
Note: The above packing list is for standard single box packing only.
3.2. Requirements IEC62368-1
Take care when designing chassis interface connectors in order to fulfill the IEC62368-1 standard.
Users of board must evaluate the end product to ensure compliance the requirements of the IEC62368-1 safety
standard are met:
The motherboard must be installed in a suitable mechanical, electrical and fire enclosure.
The system in its enclosure must be evaluated for temperature and air flow considerations.
For interfaces having a power pin such as external power or fan, ensure that the connectors and wires are
suitably rated. All connections from or to the product shall be with Safety Extra Low Voltage (SELV) circuits only.
Wires have suitable rating to withstand the maximum available power.
The enclosure of the peripheral device fulfills the fire protecting requirements of IEC62368-1.
www.kontron.com
QSEVEN-Eval Carrier - Rev. 1.1
// 15
Advertisement
Table of Contents
