Set 802.1X Device Authentication - Cisco 8831 Administration Manual

Cisco Unified IP Conference Phone 8831 settings
Table 23: 802.1X Authentication Status setting
Option
802.1X Authentication Status

Set 802.1X Device Authentication

Procedure
Step 1 ChooseApps > Admin Settings > Security Config > 802.1X Authentication > Device Authentication.
Step 2 Press Edit.
Step 3
Set the Device Authentication option to Enabled or Disabled.
The default value is Disabled.
Step 4 Press Save.
Related Topics
Unlock and Lock Options
Description
Real-time progress of the 802.1X
authentication status, displaying
one of the following states:
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
802.1X Authentication and Status menus
• Disabled: 802.1X is disabled
and the transaction was not
attempted
• Disconnected: Physical link
is down or disconnected
• Connecting: Trying to
discover or acquire the
authenticator
• Acquired: Authenticator
acquired, awaiting
authentication to begin
• Authenticating:
Authentication in progress
• Authenticated:
Authentication successful or
implicit authentication due to
timeouts
• Held: Authentication failed,
waiting before next attempt
(approximately 60 seconds)
To Change
Display only—Cannot configure.
To view the transaction status of
your 802.1X Authentication,
choose Applications > Admin
Settings > Security Configuration
> 802.1X Authentication Status.
73