Add A Local Ethernet Bridge Module - Spectrum Controls 1734 User Manual

Chapter 3: Configuring the 1734sc-IF4U for RSLogix 5000
When you create a new RSLogix 5000 project with the CompactLogix
NOTE
1769-L32C or L35CR controller, the Controller Organizer creates a
Control Net port in the local chassis. In this case, you do not need to add a
separate, local communication module.
When you create a new RSLogix 5000 project with the CompactLogix
NOTE
1769-L23E, 1769-L32E or L35E controller, The Controller Organizer
creates an Ethernet port in the local chassis. In this case, you do not need
to add a separate, local communication module.

3.3.1 Add a Local Ethernet Bridge Module

After you have started RSLogix 5000 software and created a controller project,
you can add Ethernet communication modules. A local Ethernet communication
module is a module that resides in the same chassis as the controller.
1. Select a New Module for the I/O Configuration.
2. Select the module type from the Select Module type pop-up.
Right-click on I/O
Configuration
Select New Module
User's Manual Pub. 0300266-02 Rev. B
3-3