Outline; Features - Mitsubishi Electric MR-JE-C Series Instruction Manual

2. CC-Link IE Field Network Basic/SLMP
2. CC-Link IE Field Network Basic/SLMP

2.1 Outline

CC-Link IE Field Network Basic is a standard Ethernet-based protocol used to perform cyclic communication
by the installed software without using a dedicated ASIC. You can establish a highly flexible system because
CC-Link IE Field Network Basic can be used together with TCP/IP communications.
Up to 64 axes of servo amplifiers (up to 16 axes of servo amplifiers per group) can be monitored by the
controller.
In the profile position mode, positioning operation can be performed based on the position data (target
position) given via the controller.
In the point table mode (pt), you can perform positioning operation by specifying the pre-configured point
table number (1 to 255) with a controller.

2.1.1 Features

(1) High-speed communication
High-speed communication can be established by cyclic transmission of not only bit data but also word
data.
The maximum communication speed is 100 Mbps.
(2) General-purpose Ethernet supported
Dedicated control wiring is unnecessary, and Ethernet network can be integrated.
2 - 1