Mitsubishi Electric MR-JE-C Series Instruction Manual page 104

7. OBJECT DICTIONARY
(1) Usage
This object can read the compatibility of each Sub Index. The following table shows the returned values
of each item.
Sub
Item
Index
0 Number of entries
1 Save all parameters
Save communication
2
parameters
3 Save application parameters
Save manufacturer defined
4
parameters
5 Save Point table
Note. In servo amplifiers with software version A3 or earlier, the return value is "1".
Select the items to be saved in EEP-ROM using this object. At this time, set "00h" or "01h" for Number of
entries.
When saving the servo amplifier parameter data and point table data in the EEP-ROM, set according to
the following table. When bit 1 (EEP-ROM write complete) of Status DO1 (2D11h) is "1", saving to the
EEP-ROM is completed.
Writing a value other than "65766173h" or "00000000h" to each item results in an error.
Sub
Item
Index
0 Number of entries
1 Save all parameters
Save communication
2
parameters
3 Save application parameters
Save manufacturer defined
4
parameters
5 Save Point table
Note. For servo amplifiers with software version A3 or earlier, the setting value is "1".
Saved parameter
Index: 2001h to 27FFh,
2801h to 28FFh
Index: 2001h to 27FFh
Index: 2801h to 28FFh
Setting value
5 (Note)
00000000h
65766173h ("save")
Other than above
00000000h
65766173h ("save")
Other than above
00000000h
65766173h ("save")
Other than above
00000000h
65766173h ("save")
Other than above
00000000h
65766173h ("save")
Other than above
7 - 25
Returned value
5 (Note)
00000001h (available)
00000000h (unavailable)
00000000h (unavailable)
00000001h (available)
00000001h (available)
Write to EEP-ROM
Parameter
Disabled
Enabled
Error
Disabled
Disabled
Error
Disabled
Disabled
Error
Disabled
Enabled
Error
Disabled
Disabled
Error
Point table
Disabled
Enabled
Error
Disabled
Disabled
Error
Disabled
Disabled
Error
Disabled
Disabled
Error
Disabled
Enabled
Error