Power Unit; Removal Of The Power Unit - Peugeot Motorcycles Citystar 125i Workshop Manual

POWER UNIT

POWER UNIT

Removal of the power unit

Note: To remove the cylinder head, remove the power propulsion unit.
For removal of the cylinder head, cylinder and piston, see the workshop manual:
• Engine 125/200cc. 4 valves.
- Remove the under-saddle panels. See: Procedure 2. page 23.
- Disconnect the battery.
- Drain the cooling circuit. See chapter page 31.
- Carry out the procedure for lowering the pressure in the fuel system. See: Procedure 8. page 63.
Disconnect:
• Regulator (1).
• The engine speed sensor (2).
• The lambda sensor (3).
• The starter motor (4).
• The engine ground (5).
• The engine temperature sensor (6).
66
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
2
4
5
3
6