Checking The Overrunning Clutch - Peugeot Motorcycles Citystar 125i Workshop Manual

Checking the overrunning clutch

- Rotate the overrunning clutch by hand:
• It must rotate in direction (A).
• It must be block in direction (B).
- If it doesn't, replace the overrunning clutch.
- Separate the overrunning clutch from the ring
gear.
- Check the condition of the caged needle
bearing and replace if necessary (1).
- Using your finger, turn the internal bearing
ring; it should turn freely and silently (2).
- Using a brush, clean the overrunning clutch.
- Using your hand, actuate the 3 rollers to
check the condition of release springs (3).
- Check the crimping of the 3 screws (4).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
A
B
2
3
1
4
37