Fuel System; Procedure For Reducing The Fuel Circuit Pressure; Checking Fuel Pressure - Peugeot Motorcycles Citystar 125i Workshop Manual

FUEL SYSTEM

Procedure for reducing the fuel circuit
pressure
Procedure 8
- Remove the storage compartment. See:
Procedure 1. page 23.
- Disconnect the fuel injector.
- Remove the fuel injector without disconnecting
the supply hose.
- Connect the fuel injector power supply harness
tool P/N 756017 to the fuel injector and the
battery.
- Place the injector above a pan.
- Actuate the contact switch of the tool 3 times for
5 seconds while respecting a released time of
5 seconds between each action, in order to
drop the pressure inside the supply hose of the
fuel manifold.
The pressurised jet of fuel may be dangerous for the skin, do not expose the hands to the jet of
fuel when opening the injector.

Checking fuel pressure

Modify the pressure gauge ref. 757877 as follows
- Cut a connector ref. 769197 in half.
- Connect the connectors to the pressure gauge
using collars ref. 769404.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
756017
757877
769404
FUEL SYSTEM
769197
769404
63