SERVICE OPERATIONS
Brake pad wear
Front brake
- If one of the 2 brake pads is worn down to the
minimum dimensions (A), the 2 brake pads
must be changed.
A. Mini. thickness: 1.5 mm.
Rear brake
- If one of the 2 brake pads is worn down to the
minimum dimensions (A), the 2 brake pads
must be changed.
A. Mini. thickness: 1.5 mm.
Replacing the brake pads
Front brake
- Remove the calliper (2 screw).
Tightening torque: 30 Nm.
48
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A = 1.5mm
A = 1.5mm