Fitting the primary transmission cover
125 cc
- Install the transmission cover (8 screw).
Tightening torque: 10 Nm.
- Lock the clutch drum with the pin wrench
P/N 759492.
- Fit and tighten the nut.
Tightening torque: 70 Nm.
- Fit the plastic cover.
200 cc
- Install the transmission cover (8 screw).
Tightening torque: 10 Nm.
- Fit the intake silencer fastening screw (A).
- Fit the under-saddle panels.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
759492
A
SERVICE OPERATIONS
45