Checking The Brake Fluid Level - Peugeot Motorcycles Citystar 125i Workshop Manual

SERVICE OPERATIONS
- Remove the brake pad clips and pin (1).
- Remove the brake pads.
When refitting the brake pads, push the
pistons all the way into their housing.
After refitting, actuate the brake levers
several times to bring the brake pads
against the brake disc.

Checking the brake fluid level

- Position the handlebars so that the master
cylinder will be horizontal.
- Check the brake fluid level and if necessary
top up in the master cylinder.
- Remove the cover and the diaphragm from
the master cylinder (2 screw).
Add brake fluid until it reaches the
maximum level.
50
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
MIN
A