STEERING/FORK
- Using tool P/N 757860 remove the steering
locknut.
- Remove:
• The brake washer (2).
• The nut (3).
• The rubber washer (4).
• The adjustable cone (5).
• Remove the fork.
• Remove the caged ball bearings.
Replacing the bearings of the steering
system
Steering headset cups
N
If the steering head cups are changed,
the cones and ball bearings must also
be changed.
- Using a drift, remove the steering head cups.
60
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
757860
3
5
2
4