Removal of front lower shield panels
Procedure 5.
- Remove the headlight panels. See:
Procedure 2. page 23.
- Remove the front lower shield panels.
• 3 plastic screws (A).
• 11 washer head screws Ø5 mm (B).
- Disconnect the direction indicators.
- When refitting, attach the temperature sensor
with a screw from a lower shield panel (1).
Removal of the rear shield panel
Procedure 6.
- Remove the front lower shield panels. See:
Procedure 2. page 23.
- Remove the screen (4 screw).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
1
C
BODY PANELS
A
B
A
C
25