Draining the front fork
- Remove the fork tubes. See chapter: Changing
the front fork seals, page 52.
- Remove the spring (1).
- Turn the fork tube upside down to
drain the oil into a recipient.
- Pour 0.18 l SAE10W hydraulic oil into the fork
tube.
- Refit the other items in the reverse order to
disassembly. See chapter: Changing the front
fork seals, page 52.
- Install the spring.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
1
51