Important - Tatu Marchesan SDA CP Instruction Manual

Periodically it is necessary to make the maintenance in offset double discs of
the seeder, following the instructions below:
- Period for maintenance: Approximately to every 500 hectares seeded.
- Remove the protective hubcap (A), after loosening the mounting bolts.
- Wash the hub with diesel or kerosene for remove the old grease.
- Check for the looseness in the bearing, if necessary adjust them through the
slotted nut.
- Add new grease in the inner part of the hub together to the bearings; as well
as in the chamber of the hubcaps.
- Install the hubcaps again, tightening the bolts.
B
A
Cleanness of the Large Seed Metering
When equipped with Horizontal Seed Plates.
Daily it is necessary to make a general
cleaning in each seed metering. For this it is
enough to remove the seed plate and
observe the cutoff mechanism working. By
doing so, the best seeding stand will be
assured.
IMPOR TANT: WHEN USE GRAPHITE POWDER, OR
TREATED/INOCULATED SEEDS, IT IS
NECESSARY TO CLEAN THE SYSTEM
TWICE A DAY.
MAINTENANCE MAINTENANCE
MAINTENANCE MAINTENANCE MAINTENANCE
Double Discs Maintenance
74