Tatu Marchesan SDA CP Instruction Manual page 74

Maintenance of the Fertilizer Metering
For the correct fertilizer metering maintenance, or to make any kind of repair in
its internal part, do it in the following way:
- Remove completely the square longitudinal shafts (A) of the fertilizer hoppers.
- Remove the bolts that fasten the metering in the bottom of the fertilizer hopper.
- Remove the cotter pins (B), loosen the bolt letting the square shaft (C) totally
free, disassemble it entirely; and substitute parts if necessary.
IMPORTANT: - LUBRICATE THE METERING GREASE FITTINGS DAILY, AS MENTIONED IN
THE LUBRICATION CHAPTER, AVOIDING FUTURE PROBLEMS.
- USE ONLY TATU ORIGINAL PARTS.
B
MAINTENANCE MAINTENANCE
MAINTENANCE MAINTENANCE MAINTENANCE
A
C
73