Electronic Hectaremeter - Tatu Marchesan SDA CP Instruction Manual

The Electronic Hectaremeter is an area calculator, in hectare, that puts the
technology at your service on agriculture.
With the hectaremeter it is possible to measure Partial Hectare, Total Hectare,
and numbers of revolutions of the transmission shaft.
In the illustration below see the assembly sequence being:
Install the hectaremeter in the support (A), which is assembled in TRA's external
part, in the bearing (B) of the transmission shaft, using the existing bolts in the own
bearing. Mount the support (C) in the bearing of the inferior shaft, using the same
existing bolts in the bearing (D), then adjust the sensor (E), so that it get aligned with
the magnet (F), to a distance from 3 to 5 mm of the shaft bolt.
OPTIONAL OPTIONAL
OPTIONAL OPTIONAL OPTIONAL

Electronic Hectaremeter

B
A
F
65
D
C
E