Table of Contents
Advertisement
SET
SET
SET -UP INSTRUCTIONS
SET
SET
Preparing the Seeder for Transportation
After hitching the seeder, lift totally the stands (A).
During the transport always use the locks (B) on the hydraulic cylinder rods.
Important: - ONLY FILL UP THE SEEDER IN THE WORKING SITE.
- NEVER TRAVEL AWAY WITH THE SEEDER LOADED WITH EXCESS.
The SDA CP is able to reach larger clearance of the rows for transportation, using
the pin (C) close to the support of the wheels, but only it is possible with the empty
machine, that is; without fertilizer and seeds.
-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
A
29
B
C
Note: - DOES NOT FORGET TO
REMOVE THE PIN (C)
BEFORE STARTING THE
SEEDING.
- THIS OPERATION IS
CARRIED
WORKING
H Y D R A U L I C
CYLINDERS OF THE
WHEELS.
OUT
BY
THE
Advertisement
Table of Contents
