Table of Contents
Advertisement
In order to reduce the wearing caused by attrition among moving parts of the
machine, it is necessary to make a correct lubrication, as indicated below:
- Be sure about the lubricant quality, with relation to its efficiency and purity,
avoiding the use of products contaminated by water, earth, etc...
- Use grease of medium consistency.
- Remove the crown of old grease around the articulations.
- Clean up all the grease fittings with a cloth before introducing the lubricant
and substitute the old one.
- Introduce an enough amount of new grease.
Attention: SPECIAL ATTENTION SHOULD BE GIVEN TO THE LUBRICATION INTERVALS
ON THE DIFFERENT POINTS OF THE SEEDER.
MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
Lubrication
Lubricate every 10 Hours of Service
69
Advertisement
Table of Contents
