Tatu Marchesan SDA CP Instruction Manual page 73

Cleanness of the Fertilizer Hopper and Seeds
- Remove the seed tubes (A) and fertilizer tubes (B) completely. Wash them with
water and neutral soap.
- Loosen totally the seed metering, letting the outlets free.
- Wash all the machine mainly the hoppers of seeds and fertilizer only with water.
- Hit again a water jet in the shafts of the fertilizer hoppers, after rotate them with
a wrench of 19 mm (3/4").
- Remove all the transmission chains of the machine (Seed and Fertilizer), in the
end of the seeding season, clean and store in oil recipient, until the next season.
- When restart the seeding, before place the chains, rotate the shafts of the
fertilizer and seed hoppers, and check whether they are not locked.
A
MAINTENANCE MAINTENANCE
MAINTENANCE
MAINTENANCE MAINTENANCE
B
72