Table of Contents
Advertisement
The No-Till Seed Drill, SDA CP model, is designed to the seeding over stubble
mulch, minimum or conventional tillage for Soybean, Wheat, Barley, Oats, Rice on
flood-irrigated or dryland and other small grains. As advantages, it stands out due
to high strength, accuracy on seed and fertilizer distribution, higher free articulation
of the drive wheels, besides optional for different applications.
The seeds are metered by helical fluted feed cup with simultaneous delivery
adjustment. The rates are reached by the scales displayed on the hoppers. In this
system, the seeds are gently placed to the soil in a continuous line pattern.
The fertilizer is metered by endless augers (coil springs), guaranteeing an
individual and accurate distribution in all the row units.
The setting of the different rates of fertilizer and seed population are easily
reached by the Fast Change Sprocket system - TRA.
In order to face higher usability, this model can be optionally supplied with:
- Box of small seeds for pastures;
- USG - Unit of Large Seeds for Corn, Soybean, Bean, Sorghum, Cotton, etc.,
using perforated horizontal plates;
- Wheels for Longitudinal Transport.
- Hydraulic row markers.
This manual contains the necessary information for the best seeder performance.
The Operator must read, with plenty attention, the whole manual before putting the
seeder in operation and be aware of the safety's recommendations.
To obtain any information, or in the eventuality of technical problems, consult
the Dealer, as well as Marchesan's customer service, that will guarantee the Seeder
full operation.
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
1
Advertisement
Table of Contents
