Adjustments And Operations; Seeds Distribution - Tatu Marchesan SDA CP Instruction Manual

ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA
ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA
The fluted feed cup has 03 (three) adjustment positions, used for different grain
sizes, being:
Position 1 - For small seeds of Wheat, Rice, Oats and similar.
Position 2 - For medium seeds of Soybean, Rice, Pea, etc...
Position 3 - For large seeds of Soybean, etc...
Attention: THE NON OBSERVANCE OF SUCH INSTRUCTIONS MAY CAUSE:
- DAMAGES IN THE SEEDS;
- ALTERATION IN THE QUANTITIES BEING DRILLED.
A
B

Seeds Distribution

C
31
TIONS TIONS
TIONS TIONS
Position 1
Position 2
Position 3
The calibration of the
seed rate is accomplished
through the steering wheel
(A), in the following sequence:
- Take the hair pin (B) out
from the steering wheel.
- For adjusting
approached rates in kilogram
per hectare (Kg/ha) for Wheat,
Rice and Soybean seeds,
consult the tables of the
following pages. After the
consultation, rotate
steering wheel (A) until geting
the indication of the desired
number in the scale (C).
- Lock the steering wheel
puting the hair pin back after
the final adjustment.
the
the