Tatu Marchesan SDA CP Instruction Manual page 69

5) Couple the hitch to the tractor and lift the machine until reach an enough
height to assemble the smaller wheels (B) according to the details of the page 67;
6) Lower the machine to ground level and liberate the tractor;
7) Repeat the operations 2, 3 and 4 in the other side of the machine;
8) Couple to the tractor, raise the machine until leveling with the soil;
9) Lift the stands to complete the operation;
10) For seeder up to 19 rows the wheel system must be replaced at all, due not
allowing the change of the wheel center.
11) After this procedure, accomplish the stages 4 to 9.
OPTIONAL OPTIONAL
OPTIONAL OPTIONAL OPTIONAL
B
68