Optional; Row Markers Assembly With Hydraulic Cylinders - Tatu Marchesan SDA CP Instruction Manual

Row Markers with Hydraulic Cylinders
Assembly of the Hydraulic Cylinders
- Mount the support (A) in the chassis of the machine using the bolts, lock washers
and nuts.
- Mount the arms of the row markers (B) in the support (A), through the bolts (C),
bushings, flat washers, lock washers and nuts.
- Mount the hydraulic cylinders (D) in the arms (B), fastening them in the supports
(A) through the pins and cotter pins.
- After that, mount the square shaft (E) in the arm (B), using bolts, together with
the markers discs (F), which are mounted through the nuts (H).
- Adjust the length of the marker through the square shaft (E), into or outside of
the arm (B), locking afterwards with the bolts (G).

OPTIONAL

OPTIONAL
OPTIONAL OPTIONAL OPTIONAL
A
C
46
A
E
D
G
B
H
F