Tatu Marchesan SDA CP Instruction Manual

No-till seed drill

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Table of Contents

Summary of Contents for Tatu Marchesan SDA CP

Page 2 INTRODUCTION INTRODUCTION The No-Till Seed Drill, SDA CP model, is designed to the seeding over stubble mulch, minimum or conventional tillage for Soybean, Wheat, Barley, Oats, Rice on flood-irrigated or dryland and other small grains. As advantages, it stands out due to high strength, accuracy on seed and fertilizer distribution, higher free articulation of the drive wheels, besides optional for different applications.
Page 3: Table Of Contents
INDEX INDEX INDEX INDEX INDEX TO THE OWNER ........................3 TO THE OPERATOR ....................... 4 to 7 Work with Safety - Transport of the Equipment ........... 4 to 6 Safety Stickers ......................7 TECHNICAL SPECIFICATIONS....................8 ASSEMBLY 9 to 12 ..........................
Page 4: To The Owner
TO THE OWNER TO THE OWNER TO THE OWNER TO THE OWNER TO THE OWNER The acquisition of any TATU product assures to the original purchaser the following rights: - Warranty certificate. - Instructions manual. - Technical assistance by the dealer on the equipment delivery. - The owner has obligation to inspect the conditions of the product on delivery, as well as knowing the warranty terms.
Page 5: To The Operator
CLEAN AND VISIBLE, WHEN TRANSPORTING THE IMPLEMENT DURING THE DAY OR NIGHT. USE ACCESSORY LIGHTS AND OTHER DEVICES IN ORDER TO GIVE ADEQUATE WARNING TO OPERATORS OF OTHER VEHICLES . The SDA CP Seeder is easy to operate, Read therefore some basic and indispensable understand the cares are required on its handling.
Page 6 TO THE OPERA TO THE OPERA TO THE OPERA TO THE OPERA TOR TO THE OPERA Never use your Never attempt to hands to check for change hydraulic leaks. adjustments, clean Escaping hydraulic or lubricate the oil under pressure implement when in can have sufficient movement.
Page 7 TO THE OPERA TO THE OPERA TO THE OPERA TO THE OPERA TOR TO THE OPERA - During the operation or transport do not allow riders on the tractor or implement. - Never allow children playing near the place that you are operating in, as well as when transporting or stored.
Page 8: Safety Stickers
TO THE OPERA TO THE OPERA TO THE OPERA TO THE OPERA TOR TO THE OPERA Safety Stickers The safety stickers are used to alert you to hazards in the most dangerous parts of the seeder. Keep the stickers clean and replace them when it's necessary. C A U T I O N U T I O N U T I O N...
Page 9: Technical Specifications
TECHNICAL SPECIFICA TECHNICAL SPECIFICA TIONS TIONS TECHNICAL SPECIFICA TECHNICAL SPECIFICA TIONS TECHNICAL SPECIFICA TIONS TIONS...
Page 10: Assembly
ASSEMBL ASSEMBL Y Y Y Y Y ASSEMBL ASSEMBL In order to make easy the transport, SDA CP leaves the factory semi-mounted, remaining only the installation of a few components according to the following instructions: Drawbar Assembly The drawbar is assembled and upward folded on the machine. It is enough lowering and arresting it in the chassis of the machine, as illustrates the drawing below.
Page 11: Drawbar
ASSEMBL ASSEMBL ASSEMBL Y Y Y Y Y ASSEMBL ASSEMBL Hydraulic System The hydraulic system requires double control, it means, the tractor must be equipped with four rear connections, being two each for oil inlet and outlet. - Mount the support (A) of the triple valve (B) in the drawbar. (See p. 09).
Page 12 ASSEMBL ASSEMBL Y Y Y Y Y ASSEMBL ASSEMBL ASSEMBL Connect the hoses according to the illustrative drawing of the hydraulic system on page 12. Note: IF NECESSARY, USE THREAD SEAL TAPE TO CONNECT ALL THE HOSES. SEE THE OPERATION OF THE TRIPLE VALVE IN THE FOLLOWING PAGE.
Page 13 ASSEMBL ASSEMBL Y Y Y Y Y ASSEMBL ASSEMBL ASSEMBL Operation of the Triple Valve Position 2 Position 1 Position 3 Position Position 2 - to Position 3 - to operate both cylinders operate right operate left simultaneously. cylinder. cylinder. The positions 2 and 3, are used to make finishes, allowing to work only half of the machine.
Page 14: Set-Up Instructions
-UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Preparing the Tractor In order to avoid the excessive compaction of the soil in the rows that runs behind the tractor tires, it is recommended installing wide rear tires without adding counterweight.
Page 15: Leveling The Seeder
-UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Leveling the Seeder Totally lift the rows activating the hydraulic cylinders. Using the turnbuckle (A), adjust the level of the machine. Plantadeiras Implementos Discos Ferramentas A grícolas...
Page 16: Spacing Between Rows
Model Number of Rows Row Spacing (mm) SDA CP 15 300 - 350 450 - 500 - 525 600 - 650 300 - 350...
Page 17 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis Check whether the number of rows to be assembled in the machine is odd or even and follow the instructions below: Even Number of Rows: Odd Number of Rows: Mark the center of the chassis and Install a row unit in the center of the...
Page 18 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 15 Rows 15 rows with spacing of 158 mm 158 158 158 158 158 158 158 158 158 158 158 158 158 158 13 rows with spacing of...
Page 19 -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 15 Rows 06 rows with spacing of 400 mm 05 rows with spacing of 450 mm 05 rows with spacing of 500 mm 05 rows with spacing of 525 mm...
Page 20 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 19 Rows 19 rows with spacing of 158 mm 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 17 rows with spacing of 175 mm...
Page 21 -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 19 Rows 09 rows with spacing of 350 mm 08 rows with spacing of 350 mm 08 rows with spacing of 400 mm 07 rows with spacing of 400 mm...
Page 22 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 21/23 Rows 23 rows with spacing of 158 mm 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158...
Page 23 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 21/23 Rows 15 rows with spacing of 250 11 rows with spacing of 300 10 rows with spacing of 350 mm 09 rows with spacing of 400 mm...
Page 24 -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 21/23 Rows 08 rows with spacing of 500 mm 07 rows with spacing of 525 mm 06 rows with spacing of 600 mm 06 rows with spacing of 650 mm...
Page 25 -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 27/29 Rows 29 rows with spacing of 158 mm 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158...
Page 26 -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 27/29 Rows 15 rows with spacing of 300 mm 13 rows with spacing of 350 mm 12 rows with spacing of 400 mm 11 rows with spacing of 400 mm...
Page 27 -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS SDA CP - 27/29 Rows 11 rows with spacing of 450 mm 10 rows with spacing of 500 mm 09 rows with spacing of 525 mm 08 rows with spacing of 600 mm...
Page 28: Procedures For Changing The Row Spacings
-UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Procedures for Changing the Row Spacing To change spacings in the machine, proceed as follows: - Make the spacing change in a clean, flat and stable place. Be sure that the seeder is properly supported.
Page 29 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS If necessary, slide the hydraulic cylinders (F) together with the mounting plates (G). For enabling the wished spacings, always maintain a short distance between the cylinder and the mounting plates, in order to avoid overload in the squared axle. For closing a fertilizer outlet, it is enough placing the covers (H) at the Fertilizer Metering.
Page 30: Preparing The Seeder For Transportation
- NEVER TRAVEL AWAY WITH THE SEEDER LOADED WITH EXCESS. The SDA CP is able to reach larger clearance of the rows for transportation, using the pin (C) close to the support of the wheels, but only it is possible with the empty machine, that is;...
Page 31 - NEVER TRAVEL AWAY WITH THE SEEDER LOADED WITH EXCESS. - Check the tires inflation pressure keeping the same calibration in both. For SDA CP of 15 and 23 rows, tires 12.4/11-28. For SDA CP of 23 and 29 rows, tires 14.9/ 13-28. Calibrate both with 30 PSI.
Page 32: Adjustments And Operations
ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS Seeds Distribution The fluted feed cup has 03 (three) adjustment positions, used for different grain sizes, being: Position 1 - For small seeds of Wheat, Rice, Oats and similar. Position 2 - For medium seeds of Soybean, Rice, Pea, etc...
Page 33 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS TABLE OF SEEDS DISTRIBUTION (WHEAT) Opening of the Feed Gate = Position 1 page 31. QUANTITIES IN kg PER HECTARE FOR THE DIFFERENT SPACINGS Grams in BETWEEN ROWS 50 Meters...
Page 34 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS TABLE OF SEEDS DISTRIBUTION (SOYBEAN) Opening of the Feed Gate = Position 2 page 31. Grams in QUANTITIES IN kg PER HECTARE FOR THE DIFFERENT SPACINGS Scale 50 Meters BETWEEN ROWS...
Page 35: Fertilizer Distribution
ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Fertilizer Distribution The fertilizer distribution is made through auger type dispensers, and the different rates are adjusted by the sprocket arrangement of the Drive Shaft {A } and Driven Shaft { B }.
Page 36 APPROXIMATELY 17 GRAMS OF GRANULATED COMMERCIAL FERTILIZER PER TURN. - THE TABLE ON PAGE 37, INDICATES THE OBTAINED AMOUNT WITH THE AUGER OF 1" COIL PITCH (STANDARD), FOR 21, 23, 27 AND 29-ROWS SDA CP. THIS AUGER TRANSPORTS APPROXIMATELY 17 GRAMS OF GRANULATED COMMERCIAL FERTILIZER PER TURN.
Page 37 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS...
Page 38 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS...
Page 39: Practical Test Of Seed And Fertilizer Distribution
ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS IMPORTANT The data of the previous Tables (Seed and Fertilizer) can vary due to several factors. We advise therefore to observe with attention the following procedures: Practical Test of Distribution of Seed and Fertilizer The most indicated way to check both seed and fertilizer rates is in the own field where the seeding will take place.
Page 40: Auxiliary Calculation For The Distribution Of Seed And Fertilizer
ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Auxiliary Calculation for the Distribution of Seed and Fertilizer To distribute other quantities of seed and fertilizer, in different spacings and areas from those presented in the tables, we suggest a fast calculation, where all used data can be substituted by others of your interest, being enough to use the formula below that contains the following elements:...
Page 41: Opening The Furrows
ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS Opening the Furrows The opening of the furrows is made through the offset double-discs. The one that has the function of cuting the straw (stubble) is the disc attached with the depth band. The other disc makes the opening of the furrow for the fertilizer and the seed.
Page 42: Seeding Depth
ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS Seeding Depth The seeding depth is firstly controlled by activating the hydraulic cylinders, which moves the rockshaft of the row units. To maintain the constant working depth use the stops (A), which limits the cylinder stroke.
Page 43 ADJUSTMENTS AND OPERA TIONS TIONS TIONS Lateral Depth Bands - Standard and Optional Size for SDA CP The depth bands (A) are attached to the offset double-discs. It is installed at the disc which has the function of cuting the straw. With the machine is supplied the Ø...
Page 44: Placement And Location Of The Fertilizer In The Soil
ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS Placement and Location of the Fertilizer in the Soil It should be given special attention to the position of the fertilizer regarding seed, observing mainly the following factors: - Type of Crop;...
Page 45: Closing The Furrows
ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS Closing the Furrows "V" Rubber-Tire and Cast-Iron Press Wheels. The closing of the furrows can be done through the rubber-tires (A), or cast-iron wheels (B).
Page 46: Operations - Important Points
- To make any verification in the machine, it is necessary to lower the seeder on the ground and to turn off the tractor engine. - As previously mentioned, the SDA CP seeder possess several adjustments. Therefore only the local conditions can determine the best adjustment of those...
Page 47: Optional
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Row Markers with Hydraulic Cylinders Assembly of the Hydraulic Cylinders - Mount the support (A) in the chassis of the machine using the bolts, lock washers and nuts. - Mount the arms of the row markers (B) in the support (A), through the bolts (C), bushings, flat washers, lock washers and nuts.
Page 48: Assembly Of The Hydraulic System
Assembly of the Hydraulic System The tractor must be equipped with double control, 04 quick coupler connections, enabling to work with the SDA CP Seeder. - Mount the oil distributor (A) together with the sequence valve (B) in the frame, through the bolts, lock washers and nuts.
Page 49 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Assembly of the Hydraulic System 19-Rows SDA CP Double Control,Triple Valve and Hydraulic Row Marker INDICATIVE TABLE Item Qty. Denomination Hose Ø 3/8" x 650 TR-TR Hose Ø 3/8" x 1500 TR-TR Hose Ø 3/8" x 2700 TR-TR Hose Ø...
Page 50 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Assembly of the Hydraulic System 23-Rows SDA CP Double Control,Triple Valve and Hydraulic Row Marker INDICATIVE TABLE Item Qty. Denomination Hose Ø 3/8" x 650 TR-TR Hose Ø 3/8" x 1500 TR-TR Hose Ø 3/8" x 3800 TR-TC Hose Ø...
Page 51 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Assembly of the Hydraulic System 29-Rows SDA CP Double Control,Triple Valve and Hydraulic Row Marker INDICATIVE TABLE Item Qty. Denomination Hose Ø 3/8" x 2000 TR-TR Hose Ø 3/8" x 3600 TR-TR Hose Ø 3/8" x 3160 TR-TR Hose Ø...
Page 52 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Row Marker Adjustment The use of the row markers is very important, because it is through them that a seeding will be gotten with uniform spacing. Later on, it will facilitate the cultivation and harvest. For adjusting the marker discs it is enough to loosen the bolts (A), that hold the square shafts, and move the set until the desired distance.
Page 53 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL AT T E N T I O N BEFORE START RAISING OR MOVING THE PLANTER CHECK FOR PEOPLE OR ANIMALS NEAR OR UNDER THE PLANTER, ESPECIALLY IN THE ROW MARKERS ACTION AREA. Marker Disc Angle The marker discs possess angle adjustment to facilitate their work (demarcation).
Page 54: Boxes For Small Seeds (Pastures)
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Boxes for Distribution of Small Seeds (Pastures) Mount the boxes for distribution of small seeds, using the bolts that follow together the same ones, according to illustration showing the assembling way. Install the distributor boxes of small seeds to the seeder, using bolts, lock washers and nuts.
Page 55: Rate Of Small Seeds
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Rate of Small Seeds The rate of seed to be metered is reached by the shift bushing (A), which activates the feed opening as indicated in the scales. This adjustment is obtained by loosening the lock nuts (B) and rotating the shift bushing (A), observing the scale (C).
Page 56: Row Unit For Fertilizer Banding (Soybean)
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Row Unit for Fertilizer Banding (Soybean) The SDA CP seeder can make the fertilizer banding (at side and below the seeds), as demanded by soybean and another crops.
Page 57: Horizontal Metering For Large Seeds - Usg
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Horizontal Metering for Large Seeds Aiming the maximum utilization of this seeder, MARCHESAN optionally supply the Distributors of Large Seeds. - Possible Minimum Row Spacing = 400 mm. - Minimum Distance between Fertilizer/Seed = 20 mm. Components: 01 - Seed Row Unit 02 - Fertilizer Row Unit...
Page 58 Number of Rows and Spacings for the Use of Horizontal Seed Metering Model Number of Rows Spacing (mm) SDA CP 15 SDA CP 19 SDA CP 21/23 SDA CP 27/29 * The central rows, for spacings of 400 mm, should be mounted according to...
Page 59: Assembling The Transmission Of The Usg
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Assembling the Transmission of the USG 1) Disengage all the row units from the seeder. (See orientations on pages 27 and 28). 2) Close all the outlets for seed and fertilizer. (See page 27). 3) Insert the square shaft (A) at the top of the box, after installing the bearings (B) in the lateral, the single sprocket (C) and the sprocket cone (D).
Page 60 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL 10) Insert the hexagon shaft (J) by the head of the seed rows and soon after mount the bearing (K), together with the transmission sprocket (L). 11) Insert 3 (three) chains linking: the first one to the two cones (D and E); the second one to the simple sprocket (C) of the driven shaft (upper) with smaller sprocket (F);...
Page 61: Distribution And Rate For Large Seeds
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Distribution and Rate for Large Seeds The amount of seed plate holes or slots, the size of the holes or slots, as well as the seed plate thickness vary according to the grain size and the desired plant population. Adjust the seed rate per linear meter through the sprocket arrangement of the Drive Shaft "A"...
Page 62 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL CORN DRIVE DRIVEN AMOUNT OF SEEDS "A" "B" PER 10 LINEAR METERS Part No. 0502020519 - Seed Plate with 4.5 mm thickness and 28 holes Ø 13.5 mm. For flat and short seeds. Part No. 0502020518 - Seed Plate with 4.5 mm thickness and 28 slots 10 x 15 mm.
Page 63 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL DRIVE DRIVEN AMOUNT OF SEEDS "A" "B" PER LINEAR METER BEAN Part No. 0502020333 - Seed Plate with 5.5 mm thickness and 34 slots 10 x 16.5 mm. Considering 02 (two) seeds per slot. Variation of the number of seeds per meter.
Page 64 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL DRIVE DRIVEN AMOUNT OF SEEDS "A" "B" PER LINEAR METER BEAN Part No. 0502020584 - Seed Plate with 5.5 mm thickness and 64 slots 8.5 x 12 mm. Considering 01 (one) seed per slot. Variation of the number of seeds per meter.
Page 65: Furrows Opening And Fertilizer Depth
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Furrows Opening and Fertilizer Depth The furrows opening is made through offset double discs (A and B), which allows the fertilizer placement always at side and under the seeds. To change the distance from fertilizer regarding seed is necessary to displace the fertilizer row in the chassis, as well as its rod.
Page 66: Electronic Hectaremeter
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Electronic Hectaremeter The Electronic Hectaremeter is an area calculator, in hectare, that puts the technology at your service on agriculture. With the hectaremeter it is possible to measure Partial Hectare, Total Hectare, and numbers of revolutions of the transmission shaft. In the illustration below see the assembly sequence being: Install the hectaremeter in the support (A), which is assembled in TRA's external part, in the bearing (B) of the transmission shaft, using the existing bolts in the own...
Page 67 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Tatu Electronic Hectarimeter How to operate and consult PARTIAL HECTARE and TOTAL HECTARE: When press the keyboard the display is turned on and the battery status is showed for five (05) seconds. After this time the display shows the message of the PARTIAL HECTARE. If you press again the keyboard the display shows the message of the TOTAL HECTARE.
Page 68: Wheel System For Longitudinal Transportation
OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL Wheel System for Longitudinal Transportation Transporting the 23, 27 or 29-rows Seeder in the longitudinal way, proceed as the following manner: 1) Lower the parking stands to maintain the machine leveled to the soil; 2) Remove the nuts of the hub and of the left wheel rim of the machine; 3) Remove the center of the wheel and place the special center (A) in the holes and return the nuts;...
Page 69 OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL 5) Couple the hitch to the tractor and lift the machine until reach an enough height to assemble the smaller wheels (B) according to the details of the page 67; 6) Lower the machine to ground level and liberate the tractor; 7) Repeat the operations 2, 3 and 4 in the other side of the machine;...
Page 70: Maintenance
MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Lubrication In order to reduce the wearing caused by attrition among moving parts of the machine, it is necessary to make a correct lubrication, as indicated below: - Be sure about the lubricant quality, with relation to its efficiency and purity, avoiding the use of products contaminated by water, earth, etc...
Page 71 MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Lubricate every 20 Hours of Service Lubricate every 30 Hours of Service...
Page 72 MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Lubricate every 30 Hours of Service...
Page 73 MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Cleanness of the Fertilizer Hopper and Seeds - Remove the seed tubes (A) and fertilizer tubes (B) completely. Wash them with water and neutral soap. - Loosen totally the seed metering, letting the outlets free. - Wash all the machine mainly the hoppers of seeds and fertilizer only with water.
Page 74 MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Maintenance of the Fertilizer Metering For the correct fertilizer metering maintenance, or to make any kind of repair in its internal part, do it in the following way: - Remove completely the square longitudinal shafts (A) of the fertilizer hoppers. - Remove the bolts that fasten the metering in the bottom of the fertilizer hopper.
Page 75: Important
MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Double Discs Maintenance Periodically it is necessary to make the maintenance in offset double discs of the seeder, following the instructions below: - Period for maintenance: Approximately to every 500 hectares seeded. - Remove the protective hubcap (A), after loosening the mounting bolts. - Wash the hub with diesel or kerosene for remove the old grease.
Page 76 MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Maintenance of the Valves For washing the parts only use hydraulic oil, diesel oil or kerosene. Never use aggressive products to the rubber. Triple Valve - Technical characteristics: - Maximum pressure: 170 bar (2400psi). - Working temperature: -40ºC to +120ºC. Sequence Valve Technical characteristics: - Maximum Outflow: ........
Page 77 Points For Hoisting The SDA CP No-Till Seed Drill possesses adequate points for hoisting, being two frontal points, located in the frame of the bearing support, and a rear point below the ladder. When using crane hoist, it is essential to hook the cables in the proper points.
Page 78 IMPOR IMPOR T T T T T ANT IMPOR IMPOR IMPOR Attention MARCHESAN S/A RESERVES THE RIGHT AT ANY TIME TO MAKE IMPROVEMENTS IN THE DESIGN, MATERIAL OR SPECIFICATIONS OF MACHINERY, EQUIPMENT OR PARTS WITHOUT THEREBY BECOMING LIABLE TO MAKE SIMILAR CHANGES IN MACHINERY, EQUIPMENT OR PARTS PREVIOUSLY SOLD.
Page 79 NOTES NOTES NOTES NOTES NOTES...