TDR-30 Operator's Manual
OUTER WING DECK INSTALLATION
1) Remove all banding from each deck pallet.
2) Using a lifting device with a minimum 700 lb. capacity, lift each outer wing deck off of their shipping pallet
and place beside each corresponding wing deck.
3) Each outer deck assembly has the opposite wing installed on it upon shipment. Each outer wing frame
must be removed and installed on the correct deck before the outer wings can be properly installed.
4) Remove each cable tie holding the lift pivot and lift
shaft in place, allowing them to rotate freely.
20
LH Outer Wing
Frame
RH Outer
Wing Deck