Progressive Turf Equipment TDR-30 Operator's Manual And Parts List page 23

5) Remove the 5/8" x 8.5" bolt, springs, bushing and
hardware from the deck frame in order to remove the
wing.
6) Using a lifting device with a minimum 100lb capacity,
lift each wing off of the outer decks.
7) Before installing the LH wing onto the LH deck, remove
the inner deck shield in order to access the lift shaft
mounting point.
8) Place the LH wing onto the LH deck by aligning each tie rod with its corresponding mount point.
TDR-30 Operator's Manual
21