Progressive Turf Equipment TDR-30 Operator's Manual And Parts List page 24

TDR-30 Operator's Manual
9) Remove the 5/8" x 6 hex bolt from the deck frame and install it through the lift shaft tie rod.
10) Align the corresponding tie rod end of the wing with the
mounting brackets and reinstall the hardware as shown.
11) Attach the Wing Stop Chain to the upright tab on the
wing deck next to the Height Indicator. Use existing
hardware attached to secure the chain.
LH outer wing is now ready for installation.
Repeat steps 7-11 to mount the RH wing onto the
outer deck.
22
Tie Rod
Springs
End
Wing Stop
Chain
Height
Indicator
Hex Bolt
Lock Washer &
Hex Nut
Spacer
RH