Progressive Turf Equipment TDR-30 Operator's Manual And Parts List page 25

12) Remove the 3/8" hardware from each LH lift pin on the LH
Main Wing Deck and slide the pin into each inside bushing as
shown.
13) Move the Outer Wing Deck towards the main wing deck until
they contact the front and rear plastic bumpers on the wing
deck. Align the outer wing frame bushings above the main
wing frame bushings.
14) Remove the mat mounting plate and hardware from the top
of the deck and place the black grass mat over each upright
bolt. Place the mounting plate on top of the grass mat and
reinstall the mounting hardware.
15) Lower the outer wing frame between each set of mounting
bushings until the lift pins can slide completely through each
bushing. Secure each pin using the previous 3/8" bolt, lock
washer and nut.
TDR-30 Operator's Manual
Plastic
Bumper
Mounting
Plate
Lift Pin
Grass
Mat
23