Progressive Turf Equipment TDR-30 Operator's Manual And Parts List page 26

TDR-30 Operator's Manual
16) Cut all plastic ties securing the wing stop rod. Remove the
5/8" hex bolt and lock nut from the upright brackets on the
Outer Wing and fasten the stop rod in place between the
mounting brackets.
17) Fasten deck retention chains between the wing and deck
(front outer corner and rear inner corner) as shown.
18) Repeat steps 12-17 to properly mount the RH Outer Wing
Deck onto the RH Main Wing Deck.
19) Remove outer wing cylinder from main wing (fastened with
tie-wraps) and install the base end of the cylinder to the main
wing deck. All hardware required is fastened to the cylinder
for shipping.
24
Wing Stop
Rod
Front
Rear