Introduction; Foreword - Progressive Turf Equipment TDR-30 Operator's Manual And Parts List

INTRODUCTION

Thank you for purchasing a TDR-30 mower. This product is designed and manufactured to allow safe
and productive mowing of large areas. A well-maintained machine will provide years of reliable service.

FOREWORD

This is the Operator's Manual for the TDR-30 mower. Keep it with the mower at all times. This manual
is intended as a guide to the safe use and maintenance of the machine, so before you operate this
machine, study this manual carefully.
Replace this manual immediately if it becomes lost.
This manual is not considered all-inclusive, so for further information on specific components, e.g. PTO
shafts etc refer to the respective documents included with the manual set for this machine.
The TDR-30 series are production turf grass finishing rotary mowers with a 30 foot cutting width, and is
designed to be pulled by a 85-105 PTO horsepower tractor. High blade tip speed gives this versatile
mower the ability to mow both slightly contoured and flat terrain that requires a high quality after-cut
appearance. Full-width steel rollers reduce deck bounce during mowing and allow for higher mowing
speeds.
Features:

Five independent, fully floating decks

Low power input per cutting width

Cut height can be set on each deck between 1/2 inch and 4 inches

Full-width steel rollers on front and rear deck allow increased mowing speed

Automatic mechanical deck locks for transport

Optional galvanized steel deck skins for increased service life
Applications:

Turf grass farms

Park lands and recreational areas

Grass runways
TDR-30 Operator's Manual
3