IBM Turbo 16/4 Token-Ring PC Card 2 User Manual page 74

Error Code
IBMTOKEN-xx-225
IBMTOKEN-xx-226
IBMTOKEN-xx-227
IBMTOKEN-xx-228
IBMTOKEN-xx-229
58
Turbo 16/4 Token-Ring PC Card 2
Explanation and Action
A network protocol error occurred while attempting to
operate the adapter in full duplex mode.
Explanation:
The adapter was unable to successfully
communicate with a Token-Ring switch when
attempting to open for full-duplex operation.
User Action:
Check that your full-duplex switch is
functioning correctly and that the adapter is
correctly connected to it. If this problem
persists, contact your customer service
center.
The adapter failed to open during an enhanced mode
open sequence.
Explanation:
The adapter failed during some phase of an
enhanced mode open sequence.
User Action:
Restart the computer. If the problem still
occurs run diagnostics. If the diagnostics
indicates that the adapter is not defective then
record this message number and contact your
customer service center.
The IBM Token-Ring Shared RAM Adapter opened at
xxx Mbps, half duplex.
Explanation:
Information only.
User Action:
None.
The IBM Token-Ring Shared RAM Adapter opened at
xxx Mbps, full-duplex.
Explanation:
Information only.
User Action:
None.
The adapter is configured for full duplex, but could only
be opened in half duplex mode.
Explanation:
Information only.
User Action:
None.