IBM Turbo 16/4 Token-Ring PC Card 2 User Manual page 94

Error Code
TOKENCS-DOS-205
TOKENCS-DOS-206
TOKENCS-DOS-226
TOKENCS-DOS-228
TOKENCS-DOS-229
78
Turbo 16/4 Token-Ring PC Card 2
Explanation and Action
The PC Card did not reset during initialization.
Explanation:
During initialization, no interrupt occurred.
User Action:
This can happen if you are using an enabler
and it is setting an interrupt level that is
different from the interrupt level
TOKENCS.COM is using. Check to make
sure that both interrupts are the same.
An interrupt failed to occur during initialization.
Explanation:
During initialization, no interrupt occurred.
User Action:
This can happen if you are using an enabler
and it is setting an interrupt level that is
different from the interrupt level
TOKENCS.COM is using. Check to make
sure that both interrupts are the same.
The ROM and shared RAM address ranges overlap.
Explanation:
The ROM and RAM memory areas are
overlapping.
User Action:
Check the settings in NET.CFG for MEM #1
and MEM #2. MEM #1 determines the ROM
(MMIO) base address. MEM #2 determines
the Shared RAM base address. If you are
using an enabler, check where it is placing
the ROM (MMIO) and the RAM address.
ROM is 8 KB in size. RAM is usually 16 KB in
size.
The MAX FRAME SIZE in NET.CFG file is too large
(Max=17 960)
Explanation:
The maximum frame size has been
exceeded.
User Action:
Change the maximum frame size to a valid
value.
The MAX FRAME SIZE in NET.CFG file is too small
(Min=632).
Explanation:
The maximum frame size is too small.
User Action:
Increase the maximum frame size to a valid
value.