Novell Netware 4.11 Server - IBM Turbo 16/4 Token-Ring PC Card 2 User Manual

10. Shut down your server by entering down and then entering exit from the
11. Enter server to restart the server.
12. Installation is now complete. Shut down and restart your computer for all

Novell NetWare 4.11 Server

Before you start this installation, get the latest level of patches for NetWare 4.11
Server from Novell. The current level is IntraNetWare Support Pack Version 5.0
from the Novell support Web site at support.novell.com. You will install the patches
during the following procedure.
If Novell NetWare is not on your computer, use the following instructions. If it is on
your computer, follow the instructions on page 16.
Server Driver Installation in New NetWare 4.11 Server
Changes from the usual NetWare installation are necessary because this driver is
written to a new specification level that requires new NetWare loadable modules
(NLMs). The installation program is not aware of this, though, and these NLMs must
be loaded during installation of the server device driver and after the server
installation.
Note: A message referring to protected-mode BIOS access might appear before
14
Turbo 16/4 Token-Ring PC Card 2
LOAD C:\SERVER.312\NBI31X
LOAD C:\SERVER.312\MSM31X
LOAD C:\SERVER.312\TOKENTSM
LOAD C:\SERVER.312\IBMTOKEN NAME=IBMLS1 DATARATE=M16
BIND IPX TO IBMLS1 NET=<unique net number>
See "Novell NetWare Server Driver Parameters" on page 20 for a complete list
of parameters that can be specified on the LOAD IBMTOKEN command in the
AUTOEXEC.NCF file.
Press Esc and then answer Yes to save the new file to disk. Press Esc again
to return to the server prompt.
server prompt.
changes to take effect.
Check for the following conditions to determine whether the adapter is working
correctly and whether installation is complete:
v The device driver files are loading successfully.
v There are no error messages.
If you experience problems, go to "Appendix B. Problem Determination" on
page 49.
For information concerning NetWare server error messages, see "Novell
NetWare Server Driver Messages" on page 50.
installation of Novell patches. It is for information only, and can be ignored.
1. Create a diskette containing the extracted files from the NETWARE.EXE
package file on the IBM Turbo 16/4 Token-Ring PC Card 2 CD-ROM.
2. When you see INSTALL Found the following: IBM Turbo 16/4 Token-Ring PC
Card 2 xxxx xxxx xxxx , press Enter. The actual numbers vary by product.
Then press the Insert (INS) key to install the unlisted driver.