IBM Turbo 16/4 Token-Ring PC Card 2 User Manual page 82

Error Code
LTG0038I
LTG0039I
LTG0041I
66
Turbo 16/4 Token-Ring PC Card 2
Explanation and Action
An auto-removal error has been detected.
Explanation:
The PC Card will be closed. The PC Card
has either detected a monitor contention
failure or received a beacon frame from the
ring. The problem might be that your PC Card
speed is different from the speed at which the
LAN is running.
User Action:
Perform the following steps:
1. Check and secure all cable connections
between your PC Card and the
multistation access unit (MSAU). Correct
any related problems and try the operation
again.
2. If there are no related problems, run the
diagnostics; then, try the operation again.
3. If the problem persists, print or save the
LANTRAN.LOG file and contact your LAN
administrator.
A remove medium access control (MAC) frame has
been received.
Explanation:
The PC Card will be closed. A command
forcing the PC Card to remove itself from the
ring has been received.
User Action:
Contact your LAN administrator to determine
why the REMOVE command was issued for
your computer.
An open error occurred during the lobe media test
phase.
Explanation:
The PC Card has detected a problem on your
local lobe between the PC Card and the
multistation access unit (MSAU).
User Action:
Perform the following steps:
1. Check and secure all cable connections
between your PC Card and the MSAU.
Correct any related problems and try the
operation again.
2. If there are no related problems, run the
diagnostics; then, try the operation again.