Novell Client Dos/Windows 3.1X; Novell Netware Client32 For Windows 95 - IBM Turbo 16/4 Token-Ring PC Card 2 User Manual

11. Driver installation is now complete. To add another adapter, down the server,

Novell Client DOS/Windows 3.1x

10. Installation is now complete.
11. Reboot your computer and start Windows to connect to and login to your
12. Check for the following conditions to determine whether the adapter is working

Novell NetWare Client32 for Windows 95

(Previous version is IntranetWare Client for Windows 95.)
Note: You will need the Windows 95 diskettes or CD-ROM to complete this
If you are installing on a workstation that already has Windows 95 installed using
Novell IntranetWare Client Version 2.2 for Windows 95, use the following procedure.
Note: IntranetWare Client Version 2.2 for Windows 95 or Novell Client Version 2.5
power off the server, and insert the additional adapter. NetWare will load the
appropriate driver automatically. Then repeat step 10.
1. Download Novell Client DOS/Windows 3.1x Version 2.5 or higher from the
Novell Web site (support.novell.com). Unzip the downloaded file to a directory
on your computer.
2. Exit Windows.
3. From a DOS prompt, go to the driectory where you put the file. Run
INSTALL.EXE.
4. Select Yes or No to respond to the Novell License Agreement.
5. Select Novell Client Windows Support and Work Station Manager 3.X.
Press F10 to save and continue.
6. Select 32–bit LAN Drivers and press F10 to save and continue.
7. Select USER SPECIFIED 32–Bit Driver and press Enter. Insert the CD-ROM
or the diskette that contains the device drivers into the appropriate drive. Enter
the path to the 32–bit ODI driver: x:\novell\netware where x is your CD-ROM
drive letter. The panel should say
IBM Token-Ring PCMCIA
Press Enter, configure the parameters, and press F10 to save and continue.
8. At the Installation Configuration Summary panel, confirm that the values are
what you selected, and press F10 to save and continue.
9. The files will be copied at this point.
server.
correctly and whether installation has been completed successfully:
v The device driver files are loading successfully.
v There are no error messages.
If you experience problems, go to "Appendix B. Problem Determination" on
page 49.
installation.
for Windows 95 can be downloaded from Novell on the Web at
support.novell.com
Chapter 4. Software Installation
19