IBM Turbo 16/4 Token-Ring PC Card 2 User Manual page 81

Error Code
LTG0033I
LTG0034E
LTG0037I
Explanation and Action
The receive buffer length defined is not valid.
Explanation:
The PC Card was not opened. The receive
buffer length defined in PROTOCOL.INI is not
valid. The value specified must be greater
than the allowable maximum, less than the
allowable minimum, or not a multiple of 8.
User Action:
Specify a valid receive buffer length.
The PC Card transmit buffer length defined is not
valid.
Explanation:
The PC Card was not opened. The PC Card
transmit buffer length defined in
PROTOCOL.INI is not valid. The value
specified must be greater than the allowable
maximum, less than the allowable minimum,
or not a multiple of 8.
User Action:
Specify a valid PC Card transmit buffer
length.
An unexpected error caused the Open Adapter
Command in the IBMTOKCS.OS2 device driver.
Explanation:
The PC Card was closed because of an
unexpected error condition.
User Action:
See the message log, LANTRAN.LOG, for
additional information about this error. The
error must be corrected before you can use
this PC Card.
Appendix B. Problem Determination
65