Novell Netware 5.0 Server - IBM Turbo 16/4 Token-Ring PC Card 2 User Manual

14. Press ESC and answer YES to save the new file to disk. Press ESC again to
15. Type the following commands from the server prompt to shut down the server
16. Perform the following COPY commands, making sure that the diskette that you
17. Go to the Novell server directory and enter server at the DOS prompt to
18. Installation is now complete. Check for the following conditions to determine

Novell NetWare 5.0 Server

Server Driver Installation During NetWare 5.0 Server Installation
Installation of the network board and its device driver occurs during the combined
storage device and network board installation step. Use the following instructions to
install the network board and its driver during a new NetWare 5.0 server installation.
1. Create a device driver installation diskette.
2. During the installation program, when you get to Select a Storage Device and a
3. Select a Storage Device
See "Novell NetWare Server Driver Parameters" on page 20 for a complete list
of parameters that can be specified on the LOAD IBMTOKEN command in the
AUTOEXEC.NCF file.
return to the server console.
and exit to DOS: down, and then exit.
created in step 1 is inserted in the diskette drive. Note that it will prompt you at
each of the following files to ask if you want to perform a file overwrite; it is OK
to overwrite these files.
COPY A:\NOVELL\NETWARE\NBI.NLM C:\NWSERVER
COPY A:\NOVELL\NETWARE\MSM.NLM C:\NWSERVER
COPY A:\NOVELL\NETWARE\TOKENTSM.NLM C:\NWSERVER
COPY A:\NOVELL\NETWARE\IBMTOKEN.LAN C:\NWSERVER
COPY A:\NOVELL\NETWARE\IBMTOKEN.LDI C:\NWSERVER
restart the server.
whether the adapter is working correctly and whether installation has been
completed successfully:
v The device driver files are loading successfully.
v There are no error messages.
If you experience problems, go to "Appendix B. Problem Determination" on
page 49.
For information concerning NetWare server error messages, see "Novell
NetWare Server Driver Messages" on page 50.
Create a diskette containing the extracted files from the NETWARE.EXE
package file on the IBM Turbo 16/4 Token-Ring PC Card 2 CD-ROM.
Network Board:
v Select and configure the storage device
v Select and configure the network board
v Load a NetWare Loadable Module TM program (if required)
Storage devices such as hard disks, CD-ROMs, and tape devices require a
software driver to communicate with the storage adapter. The software driver for
the storage device is called a custom device module (CDM). Each type of
storage device requires a CDM.
The installation program auto-detects many types of storage devices such as
IDE drives, SCSI drives, CD-ROM drives, and tape drives. If your storage
Chapter 4. Software Installation
17