Crankshaft - Suzuki Vinson LT-A500F Service Manual

3-62 ENGINE
C R A N K S H A F T
• Determine the width between the webs referring to the figure
when rebuilding the crankshaft.
Crank-web-to-web-width
Standard: 71.1 ±0.1 mm (2.795±0.004 in)
• When mounting the crankshaft in the crankcase, it is neces-
sary to pull its left end into the crankcase by using the spe-
cial tool.
(T^L) 09910-32812: Crankshaft installer
09940-52861: Attachment
A C A U T I O N
Never fit the crankshaft into the crankcase by striking
it with a plastic hammer.
Always use the special tool, otherwise the accuracy of
the crankshaft alignment will be affected.
© Bearing
© Crankshaft (R)
© Washer
© Crank pin
© Bearing
© Conrod
© Crankshaft (L)
© Bearing