Reassembly And Adjustment - Suzuki Vinson LT-A500F Service Manual

4-34 SHAFT DRIVE AND DIFFERENTIAL
OIL S E A L
Inspect the oil seal for wear or damages. If any damages are
found, replace the oil seal with a new one.
• Remove the right final driven gear oil seal. (CJr
• Remove the left final driven gear oil seal and final drive shaft
oil seal using the special tool.
Oil seal remover
(TSSL) 0 9 9 1 3 - 5 0 1 2 1 :
ACAUTIOINT
Replace the removed oil seal with a new one.
R E A S S E M B L Y AND ADJUSTMENT
BEARINGS
• Install the new drive shaft bearing and drive gear bearing
using a suitable tool.
• Install the new final drive pilot bearing using the suitable tool.
• Install the new right final driven gear bearing using the spe
cial tools.
Bearing installer set
(T^L) 0 9 9 1 3 - 7 0 2 1 0 :
Bearing installer
0 9 9 2 4 - 7 4 5 2 0 :
NOTE:
First, install the oil seal. (CZT 4-35)
4-33)
3