Shaft Drive - Suzuki Vinson LT-A500F Service Manual

SHAFT DRIVE

Complaint
Power will not
transmit from the
engine to the rear
w h e e l .
Power will not
transmit from engine
to the front w h e e l .
C A R B U R E T O R
Complaint
Starting difficulty.
Idling or l o w - s p e e d
trouble.
Medium-or high
s p e e d trouble.
Overflow a n d fuel
level fluctuations.
S y m p t o m a n d p o s s i b l e c a u s e s
1. Broken secondary drive and driven gear teeth.
2. Broken rear output shaft.
3. Worn or broken rear axle shaft serration.
4. Worn or d a m a g e d coupling joint serration.
5. Broken or d a m a g e d rear drive and driven bevel
gears.
6. Worn or d a m a g e d universal joint.
1. Broken secondary drive and driven gear teeth.
2. Worn or broken propeller shaft serration.
3. D a m a g e d coupling.
4. Worn or d a m a g e d coupling joint serration.
5. Broken or d a m a g e d front drive and driven bevel
gears.
6. Broken or damaged front differential gears or pinions.
7. Improperly adjusted differential control cable.
8. Worn or d a m a g e d sliding dog, shaft, and fork of the
differential gears.
9. Worn or d a m a g e d universal joint.
10. Worn or damaged front axle or universal joint
serration.
S y m p t o m and p o s s i b l e c a u s e s
1. Clogged starter jet.
2. Clogged starter jet passage.
3. Air leaking from joint between starter body a n d
carburetor.
4. Improperly working starter (enricher) plunger.
1. Clogged or loose pilot jet.
2. Clogged or loose pilot air jet.
3. Clogged pilot outlet port.
4. Clogged bypass port.
5. Starter (enricher) plunger not fully closed.
6. Improperly set pilot screw.
7. Incorrect float height.
1. Clogged main jet.
2. Clogged main air jet.
3. Clogged needle jet.
4. Improperly working throttle valve.
5. Clogged fuel filter.
6. Incorrect float height.
7. Starter (enricher) plunger not fully closed.
1. Worn or d a m a g e d needle valve.
2. Broken needle valve spring.
3. Improperly working float.
4. Foreign matter on the needle valve.
5. Incorrect float chamber fuel level.
SERVICING INFORMATION
R e m e d y
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Adjust.
Replace.
Replace.
Replace.
R e m e d y
Clean.
Clean.
Tighten, adjust or replace
gasket.
Adjust.
Clean or tighten.
Clean or tighten.
Clean.
Clean.
Adjust.
Adjust.
Adjust.
Clean.
Clean.
Clean.
Adjust.
Clean or replace.
Adjust.
Adjust.
Replace.
Replace.
Adjust or replace.
Clean or replace with needle
valve seat.
Adjust float height.
9-5