Oil Filter Replacement - Suzuki Vinson LT-A500F Service Manual

OIL FILTER REPLACEMENT

• Drain the engine oil. (CZT 2-8)
• Remove the oil filter © using the special tool.
• Apply engine oil lightly to the gasket of the new oil filter,
before installation.
• Install the new oil filter. Turn it by hand until you feel that the
oil filter gasket has contacted the oil filter mounting surface.
Then, tighten the oil filter two full turns using the special tool.
09915-40610: Oil filter wrench
NOTE:
To properly tighten the oil filter, use the special tool. Never
tighten the oil filter by hand.
• Add new engine oil and check the oil level, (c^T
WBEH Engine oil capacity
Oil change:
Oil and filter change:
Engine overhaul:
A CAUTION
ONLY USE A GENUINE SUZUKI MOTORCYCLE OIL
FILTER.
Other manufacturer's oil filters may differ in thread
specifications (thread diameter and pitch), filtering
performance and durability which may lead to engine
damage or oil leaks. Also, do not use a GENUINE
SUZUKI AUTOMOBILE OIL FILTER on this vehicle.
2-8)
3
2.3 L (2.4 US qt, 2.0 Imp qt)
2.5 L (2.6 US qt, 2.2 Imp qt)
3.0 L (3.2 US qt, 2.6 Imp qt)