Front Brake Construction; Brake Hose No - Suzuki Vinson LT-A500F Service Manual

FRONT B R A K E
C O N S T R U C T I O N
© Master cylinder reservoir cap
© Diaphragm
© Master cylinder clamp
© Boot
© Piston/cup set
© Cup
© Spring
© Master cylinder
© Brake hose No.1
® Brake hose No.2
® Brake hose No.3
® Brake pipe joint
® Brake pipe, RH
@ Brake pipe, LH
© Piston
© Piston seal
® Dust seal
© Brake caliper
© Brake caliper holder
© Brake pad
® Pad Spring
® Master cylinder clamp bolt
® Brake hose union bolt
© Brake pipe nut
® Air bleeder valve
© Brake caliper mounting bolt
© Brake pad mounting pin
N m
ITEM
10
®
23
(D
© 16
7.5
®
© 26
© 18
A WARNING
* This brake system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use or
mix different types of fluid, such as silicone-based or petroleum-based brake fluids.
* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake
fluid left over from the last servicing or which has been stored for long periods of time.
* When storing brake fluid, seal the container completely and keep it away from children.
* When replenishing brake fluid, take care not to get dust into the fluid.
* When washing brake components, use new brake fluid. Never use cleaning solvent.
* A contaminated brake disc or brake pad reduces braking performance. Discard contami-
nated pads and clean the disc with high quality brake cleaner or a neutral detergent.
A C A U T I O N
Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials
etc.
kgf-m Ib-ft
1.0 7.0
2.3 16.5
1.6 11.5
0.75 5.0
2.6 19.0
1.8 13.0
CHASSIS 7-17